CE Certified Rotary Tribometer Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Rotary Tribometer is a multifunctional friction and wear testing instrument designed for comprehensive tribological research. You use this system to study friction behavior, wear mechanisms, and lubrication performance under controlled rotational motion. By combining axial loading, precise load control, and an open test platform, the Rotary Tribometer allows you to simulate a wide range of real operating conditions, including dry friction, lubricated friction, high-speed rotation, and high-temperature environments. It provides accurate measurement of friction coefficient, wear behavior, temperature, vibration, and electrical contact resistance for material and lubricant evaluation.
Standards
You can conduct tests in accordance with widely recognized international and regional standards, including:
(1) GB/T 3140 series – Wear performance testing of lubricating oils and greases
(2) ASTM D2266 – Anti-wear properties of lubricating grease (four-ball method)
(3) ASTM D2783 – Extreme pressure properties of lubricating fluids
(4) ASTM D3702 – Thrust washer wear testing
(5) ASTM D4172 – Anti-wear properties of lubricating oils
(6) ASTM D5183 – Determination of friction coefficient of lubricants
(7) ASTM G99 – Pin-on-disk wear testing
(8) DIN 50324 – Determination of friction and wear of solid materials
(9) DIN 51350 (Parts 1–6) – Lubricant shear stability and wear testing
(10) ISO 11008 – Extreme pressure properties of lubricating greases (four-ball method)
(11) IP 239 / IP 300 – Lubricant extreme pressure and wear tests
(12) CEC L-45-T-93 – Shear stability of transmission fluids
Parameters
| Item | Standard Configuration | High-Speed Configuration | Upgraded Configuration |
|---|---|---|---|
| Speed Range | 30–3.000 rpm | 30–3.000 rpm / 100–10.000 rpm | Same as high-speed |
| Maximum Spindle Load | 10.000 N @ 3.000 rpm | 10.000 N @ 3.000 rpm / 4.000 N @ 10.000 rpm | Same as high-speed |
| Maximum Spindle Speed | 6.000 rpm | 10.000 rpm | 10.000 rpm |
| Torque Capacity | 14 Nm @ 30–1.500 rpm | 14 Nm @ 30–1.500 rpm / 7 Nm @ 3.000 rpm / 2.1 Nm @ 10.000 rpm | 25 Nm @ 30–1.500 rpm / 13 Nm @ 3.000 rpm / 4 Nm @ 10.000 rpm |
| Motor Power | 2.2 kW, single-phase | 2.2 kW, single-phase | 4 kW, three-phase |
| Temperature Capability | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) |
| Load Range | 1–10.000 N (depending on actuator) | 1–10.000 N (depending on actuator) | 1–10.000 N (depending on actuator) |
| Control Parameters | Speed, load, temperature, test time | Speed, load, temperature, test time | Speed, load, temperature, test time |
| Recorded Parameters | Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count | Same as standard | Same as standard |
| Data Interface | USB / software | USB / software | USB / software |
| Air Supply | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar |
| Dimensions | 900 × 600 × 2.000 mm | 900 × 600 × 2.000 mm | 900 × 600 × 2.000 mm |
| Weight | 350 kg | 350 kg | 350 kg |
Features
Multi-condition testing capability supporting dry friction, lubricated friction, rolling contact, thrust pad, and four-ball configurations
Wide load range from low-load precision testing to high-load extreme pressure evaluation
High-speed spindle design with precision bearings ensuring stable operation up to 10.000 rpm
Online monitoring of temperature and vibration with automatic shutdown protection
Electrical contact resistance measurement for tribocorrosion and wear-corrosion interaction studies
Flexible fixture compatibility for pin-on-disk, thrust pad, four-ball, pump vane, and rolling fatigue tests
Digital data acquisition with automatic recording and export in standard data formats
High-temperature testing capability up to 600 °C for dry and lubricated friction research
Accessories
(1) Low-load actuator (20–1.000 N)
(2) High-load actuator (200–10.000 N)
(3) Precision low-load fixtures for small-sample testing
(4) Four-ball sliding and rolling test fixtures
(5) Pin-on-disk and block-on-ring adapters
(6) Specialized fixtures for rolling fatigue and seal testing
(7) Lubricant circulation system
(8) Calibration system for load, torque, and temperature
(9) Electrochemical testing unit for tribocorrosion experiments
Send product request
Other supplier products
 |
Universal Wear Tester丨Universal Wear Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Universal Wear Tester is used to test wear and abrasion resistance of fabrics for appar... |
 |
Large-Area LED Solar Simulator 3A+ Manufacturer | IEC 60904-9 Class AAA+ Solar Simulation | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60904-9 – Photovoltaic Devices: Performance Requirem... |
 |
Safety Helmet Roll-off Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a we... |
 |
Dynamic waterproof bending testing machine for finished shoes | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: It is used to test the dynamic waterproof performance of various fin... |
 |
Sliding Bearing Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sliding bearing fatigue testing machine is an important testing device, mainly used to ... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
