Photovoltaic module damp heat test chamber
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related electronics. By combining high temperature and high humidity control, the system enables accelerated evaluation of module reliability, encapsulant degradation, and potential PID (Potential Induced Degradation) effects. It is suitable for R&D laboratories, quality assurance, and certification testing in compliance with international standards.
Application
Accelerated aging tests of photovoltaic modules under high temperature and humidity.
Evaluation of PID resistance and encapsulant performance.
Reliability testing of batteries, PV modules, and electronic assemblies in wet and humid conditions.
Indoor certification and R&D testing for IEC/UL compliance.
Standards
(1)IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)UL 1073: Standard for Safety for Enclosures for Electrical Equipment
(3)ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
(4)CE Certification (Conformité Européenne)
Features
(1)Extreme Environmental Simulation: 85°C ±2°C / 85% RH control replicates 10+ years of tropical aging in 1.000 hours.
(2)Ultra-Stable Performance: ±1°C temperature stability and ≤2°C uniformity for consistent long-term testing.
(3)Energy Efficiency: Advanced insulation and heat recovery reduce power consumption by 40%; ECO mode for auto power-down during stabilization.
(4)Safety First: Dual overload protection with thermal cutout and door interlock system.
(5)Smart Diagnostics: AI-powered degradation prediction using IV curve shifts and EL imaging data; remote monitoring via 4G/LTE.
(6)Flexible Operation: Dual-chamber design enables simultaneous wet/dry testing; modular expansion up to 1.500 L for full-size PV arrays.
(7)User-Friendly Interface: 10” touchscreen HMI with preloaded IEC/UL test profiles and automated condensation drainage.
(8)Glovebox Compatibility: Oxygen/moisture controlled operation for sensitive electronics.
Parameters
| Parameter | Specification |
|---|---|
| Temperature Range | 30°C to 85°C (operational) |
| Temperature Stability | ±1°C (at 85°C setpoint) |
| Temperature Uniformity | ≤±2°C (empty chamber) |
| Humidity Range | 30%–95% RH (non-condensing) |
| Humidity Stability | ±2.5% RH (at 85% RH) |
| Chamber Volume | 500 L (standard), expandable to 1.500 L |
| Power Supply | 380V/415V, 3-phase, 50/60Hz |
| Dimensions (W×D×H) | 1.200 mm × 1.800 mm × 2.000 mm |
| Weight | 800 kg (net) / 1.200 kg (gross) |
Send product request
Other supplier products
 |
Infusion Pump Flow Rate Tester GB 8368 | Compliance Standards GB 8368 - 2018 Disposable Infusion Sets, etc. Main Uses The infusion set flow rate tester is an instrument specifically des... |
 |
Safety Helmet Electrical Insulation Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Electrical Insulation Tester is designed to assess the electrica... |
 |
Single chip liquid crystal touch impact testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Liquid crystal touch impact testing machine is mainly used for hard plastics (incl... |
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Intramedullary Nails Internal-fixation Pull-out Force Tester is a specialized ... |
 |
Seatbelt Fabric Pilling Tester | Get a quote： Whats/App: +86 181 0160 0864 The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments caused by s... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
