Multifunctional Dynamic Scratch and Wear Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multifunctional Dynamic Scratch and Wear Tester is designed to evaluate the scratch, wear, and impact resistance of various materials and surfaces. It accommodates both laboratory samples and finished products, whether flat or curved. This versatile tester provides precise, repeatable testing under controlled loads and motion parameters, supporting research, quality control, and product validation across multiple industries.
Application
Primary applications
Scratch, wear, and impact resistance testing for materials and surfaces
Evaluation of automotive interior materials, polymers, and metal coatings
Laboratory research and product quality assurance Testing of both flat and curved samples for industrial or consumer products
Typical tested products
Automotive interior panels and trims
Metal and polymer-coated components
Consumer products with protective surface coatings
Laboratory-prepared material samples
Standards
(1) BMW GS 97034-8 – Automotive interior materials surface tilt test specification
(2) BMW GS 97034-9 – Automotive interior materials surface scratch test specification
(3) GB/T 23989-2009 – Determination of scratch resistance of coatings
(4) GB/T 1768-2006 – Paint film wear resistance measurement
(5) GB/T 12444-2006 – Metallic materials wear test method
(6) ISO 7148 – Metallic materials – Friction and wear test method
(7) ASTM G171 – Scratch hardness determination of materials
(8) ASTM G133 – Reciprocating sliding wear test method
(9) ASTM G99 – Pin-on-disk friction and wear test method
(10) ASTM D7027 – Evaluation of scratch resistance of polymer coatings
Parameters
| Test Function | Technical Specification |
|---|---|
| Test Force Range | 0~30 N (adjustable in 1 N increments) |
| Stroke Length | Up to 120 mm |
| Test Line Speed | Up to 1500 mm/s |
| Cycle Count | 0~999.999.999 (programmable) |
| Sample Type | Sample A: Disk edge, radius 2.5 mmSample B: Pin tip |
| Working Stage | X-Y working test stage |
| Power Supply | AC 220 V, 50 Hz, 750 W |
Send product request
Other supplier products
 |
Elastic Tape Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This instrument is used to test the elasticity of elastic belt after reciprocating... |
 |
Gas Hazard Characteristics Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Gas Hazard Characteristics Tester is a device used to determine the flammable ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Manual HEPA/ULPA Filter Scanning Test System is designed for quality control o... |
 |
Artificial turf wear tester EN 15330 | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
 |
Metal Corrosivity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Metal Corrosivity Tester is used to determine the corrosivity of liquids and s... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
