Thermal Conductivity Tester for Silicone and Ceramic Substrates
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Thermal Conductivity Tester for Silicone and Ceramic Substrates is a high-precision instrument designed to measure thermal resistance, thermal conductivity, and interface contact thermal resistance of thin heat conductors, solid electrical insulation materials, thermal grease, resins, rubber, beryllium oxide ceramics, and aluminum oxide ceramics. The instrument can test solid sheet materials directly, and with the use of a sample frame, it can measure powdered and paste materials.
Designed and manufactured in full compliance with ASTM D5470-2017 standards, tester incorporates over a decade of production experience and user feedback to provide mature and reliable performance. The instrument features servo-controlled precise automatic pressing, automatic thickness measurement, 6-point temperature gradient detection, and computer-controlled fully automatic operation. Built-in thermal protection around the test rod reduces environmental influence, enabling precise measurement of materials under varying pressures. This tester also includes automatic cold-end temperature compensation, eliminating the need for ice-water compensation.
Users can select standard or compact models according to laboratory space constraints without compromising performance. The instrument is widely applied in universities, research institutes, quality inspection laboratories, and industrial production plants.
Application
This tester is suitable for testing:
Thin heat conductors and metals
Solid electrical insulation materials
Thermal greases and thermal silicone pads
Resins, rubber, and engineering plastics
Beryllium oxide ceramics and aluminum oxide ceramics
Aluminum substrates, copper-clad laminates, and composite ceramics
Foam copper, graphite sheets, and other novel thermal interface materials
Typical applications include:
Academic research: Thermal property analysis of materials
Industrial quality control: Verifying thermal performance of production materials
R&D labs: Testing thermal interface materials (TIMs) and adhesives
Production sites: Evaluating aging, reliability, and compression performance of materials
Standards
The instrument complies with:
MIL-I-49456A – Insulating Sheet Materials, Thermally Conductive Resins, Glass-Fiber Reinforced Thermal Materials
GB 5598-2015 – Method for Determining Thermal Conductivity of Beryllium Oxide Ceramics
ASTM D5470-2017 – Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
GB/T 29313-2012 – Test Methods for Thermal Conductivity of Electrical Insulation Materials
Parameters
| Item | Specification |
|---|---|
| Sample size | Φ30 mm or 20×20 mm (standard); custom sizes available |
| Sample thickness | 0.001–50 mm; typical 0.02–20 mm |
| Hot plate temperature range | Room temperature–100 °C (standard); optional 300 °C or 500 °C |
| Cold plate temperature range | 0–99 °C; precision 0.01 °C (with high-precision low-temperature water bath) |
| Thermal conductivity range | 0.01–50 W/m·K; 0.1–300 W/m·K, software auto-switching |
| Thermal resistance range | 0.05–0.000005 m²·K/W |
| Pressure range | 0–1000 N; servo-controlled; precision 1 N |
| Thickness measurement range | 0–50 mm; resolution 0.1 μm; automatic |
| Sample quantity | 1 piece (thin film, multiple layers) |
| Measurement accuracy | Better than 3% |
| Test modes | Thermal resistance under varying pressures; material thermal conductivity; contact thermal resistance; aging reliability; compression performance; inter-sample contact thermal resistance |
| Automation | Computer-controlled fully automatic measurement and report output |
| Power supply | 220 V / 50 Hz; 500 W |
Send product request
Other supplier products
 |
Protective Clothing Chemical Liquid Penetration Resistance Tester | Getaquote: Whats/App: +86 181 0160 0864 The Protective Clothing Chemical Liquid Penetration Resistance Tester is designed to evaluate the resista... |
 |
Battery Slurry Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Battery Slurry Resistance Tester is a precision testing system designed to mea... |
 |
Continuous Load Surface Performance Measurement Instrument | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Continuous Load Surface Performance Measurement Instrument is designed for eva... |
 |
Toyota Specialized Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The Toyota Special Abrasion Tester is a precision wear testing instrument designed to evaluate the abra... |
 |
Wet leakage current test system of photovoltaic module | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Wet Leakage Current Test System is designed for high-precision evaluation of i... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
