OEM Electric Toothbrush Airtightness Testing Equipment
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1) IEC 60529 (IP Code protection classification)
(2) IPX7 waterproof rating standard (1 meter water immersion for 30 minutes without failure)
(3) ISO 20653 (Degrees of protection for road vehicles – reference sealing principles)
(4) GB/T 4208 (Enclosure protection standard)
(5) Internal leakage test validation standards for consumer electronic sealing performance
Parameters
| Item | Specification |
|---|---|
| Measurement Range | 1–100 kPa (differential pressure) / 0–30 kPa (custom type) |
| Resolution | 0.01 mm |
| Sensor Accuracy | ±0.1% F.S |
| Repeatability | ±0.02% |
| Test Method | Differential pressure / Indirect pressure method |
| Operating Temperature | 0–50°C |
| Air Source Pressure | 0.1–1.0 MPa |
| Air Requirement | Clean and dry compressed air |
Features
(1) High-precision differential pressure detection with ±1 Pa-level sensitivity
(2) Supports IPX7 waterproof sealing verification testing
(3) Dual testing methods including differential pressure and indirect pressure mode
(4) Stable measurement system with high repeatability and low drift
(5) Suitable for high-volume production line testing
(6) Fast response and short cycle time for efficient inspection
(7) Custom fixture compatibility for different toothbrush structures
Accessories
(1) Custom sealing fixture for electric toothbrush housing
(2) Differential pressure sensor module
(3) Air pressure regulation and filtration unit
(4) PLC control system module
(5) Standard leakage calibration reference unit
Send product request
Other supplier products
 |
Plastic Scratch Test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Plastic Scratch Test Machine is widely used for: Assessing the scratch re... |
 |
Appliance Stability Testing Apparatus (for Appliance Stability Tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1... |
 |
Burning heat value tester for building materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Scope of application It is suitable for measuring the calorific value of solid and wavy co... |
 |
SATRA TM55 Leather Low-Temperature Flexing Tester Manufacturer | Factory Direct Sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. Inner and Outer Tank Material: Stainless Steel #304 2. Controll... |
 |
Walk-in Humidity Test Chamber High and Low Temperature Aging Room | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Walk-in High-Temperature Aging Chambers are typically assembled on-site using... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
