In-situ expansion analysis system

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and related materials during charge/discharge, storage, and abuse testing. The system enables real-time, non-destructive monitoring of cell expansion behavior under controlled temperature, pressure, and environmental conditions. It is widely used in lithium-ion, solid-state battery R&D, safety evaluation, and reliability testing.

Application

(1) In-situ expansion and swelling analysis of lithium-ion pouch, prismatic, and coin cells during charge/discharge cycles.

(2) Dimensional change monitoring of solid-state batteries and solid electrolytes under electrochemical loading.

(3) Thermal expansion and contraction testing under wide temperature ranges for battery reliability studies.

(4) Pressure-coupled expansion analysis for pouch cell fatigue and mechanical stability evaluation.

(5) Correlation analysis between expansion, voltage, cycle life, and degradation mechanisms.

(6) Abuse and reliability testing including overcharge, fast charging, and thermal stress conditions.

Standards

(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.

(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test.

(3) IEC 62660-2 – Secondary lithium-ion cells for propulsion of electric road vehicles – Reliability and abuse testing.

(4) DIN 51221 – Testing of adhesives – Determination of tensile shear strength (dimensional deformation reference).

(5) CE Certification – Conformité Européenne.

Features

(1) Sub-micron displacement resolution down to 0.01 μm for precise expansion measurement.

(2) Non-contact laser displacement sensors eliminate mechanical interference and measurement hysteresis.

(3) Multi-environment testing with integrated temperature chamber covering –40°C to 200°C.

(4) Dynamic pressure loading up to 50 bar for pouch cell fatigue and mechanical stress testing.

(5) Real-time 3D deformation imaging with structured light scanning technology.

(6) AI-assisted deformation analysis for quantification of anisotropic and localized swelling.

(7) Multi-channel architecture supporting up to 8 cells tested simultaneously.

(8) Automatic test sequencing with preloaded protocols for common battery test scenarios.

(9) Open data interface for synchronization with EIS, gas analysis, and thermal imaging systems.

Parameters

Parameter	Specification
Displacement Range	±500 μm (linear), ±1° (angular)
Measurement Accuracy	±0.1 μm (linear), ±0.01° (angular)
Resolution	0.01 μm
Temperature Range	–40°C to 200°C
Temperature Ramp Rate	Up to 1°C/min
Pressure Range	0–50 bar (dynamic loading)
Channel Capacity	Up to 8 channels
Data Acquisition Rate	10,000 points/s per channel
Power Supply	100–240 V AC, 50/60 Hz
Dimensions (W×D×H)	800 × 600 × 1200 mm
Weight	220 kg (net) / 280 kg (gross)

Other supplier products

	Water-filled dummy	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Water-filled Dummy (Ballast Weight Dummy) is a highly practical simulation too...
	High-Frequency Reciprocating Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk High-Frequency Reciprocating Tester is a fully automated, computer-controlled trib...
	Solids Spontaneously Igniting Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of...
	Surface Performance Tester STD-FB4-A	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Surface Performance Tester is a high-precision instrument designed to quantify...
	Adhesion Strength Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Adhesion Strength Tester is a precision instrument designed to evaluate peelin...

All supplier products

Same products

	ER4043 Silicon Aluminum Welding Wire	Seller: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...