Schopper Abrasion Tester Manufacturer | Paper & Packaging Abrasion Testing Machine Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Rotary Abrasion Mechanism: A specimen clamped on a rotating test head (166° taper angle) maintains line contact with an abrasion block, simulating tangential friction.
Modular Clamping System: Obtuse-angle cone chuck and mounting support ensure secure specimen fixation during high-speed rotation (75 revolutions/minute).
Touchscreen Interface: Real-time control panel with programmable cycles, load settings, and rotation reversal triggers.
Arc Height Adjustment: Built-in gauge for measuring sample deformation post-test, critical for assessing material resilience.
Load Customization: Interchangeable weights (50g–1500g) accommodate diverse testing requirements, from delicate fabrics to heavy-duty materials.
Space-Saving Design: Compact dimensions (325×565×560mm) and lightweight build (35kg) optimize laboratory workspace utilization.
Parameters
| Parameter | Specification |
|---|---|
| Revolutions per Minute | 75 rpm |
| Taper Angle | 166° |
| Mounting Head Declination | 7° |
| Specimen Size | 100 cm² |
| Test Area | 50 cm² |
| Arc Height Adjustment | 0–10 mm (manual/automatic) |
| Load Range | 0.5–25 N (adjustable) |
| Standard Weights | 50g, 100g, 250g, 500g, 1000g, 1500g |
| External Dimensions | 325 (W) × 565 (D) × 560 (H) mm |
| Net Weight | 35 kg |
| Power Supply | 115/240V, 50/60Hz |
| Power Consumption | 130W |
TestProcedures
1. Sample Installation
Fix the temperature and humidity treated sample onto the rotating test head, adjusting the arch height to 5-8 mm.
2. Sandpaper Fixation
Use the pressure plate clamp to install the sandpaper onto the lower surface of the pressure plate, ensuring it is flat and wrinkle-free.
3. Parameter Setting
Input parameters such as rotation speed, number of friction cycles, and pressure value via the touchscreen.
4. Test Start
Lower the pressure plate to bring the sandpaper into contact with the sample, beginning the friction test.
5. Result Evaluation
After the test, observe the sample's mass loss and the formation of holes to quantify its abrasion resistance.
Send product request
Other supplier products
 |
Femoral Stem Fatigue Performance Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in par... |
 |
Scratch tester STD-KK02 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction: With the continuous expansion of the use of plastic molding products... |
 |
Aerosol Spray Combustion Tester for Laboratory Use | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)GB/T 21631-2008 (2)GAT536 (3)NY/T 1860 Product Features (1)... |
 |
Infusion Pump Flow Rate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Pump Flow Rate Tester is specifically designed for testing the flow rate of so... |
 |
G506 Filter Performance Testing System manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The latest G506 automatic filter performance tester uses the most advanced te... |
