High Precision Automotive Wire Low-Temperature Winding Tester OEM Supplier

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features

Electric-driven winding ensures precise control and repeatable test results.

Supports multiple mandrel sizes and through-line sleeves for diverse wire diameters.

Accurately simulates low-temperature bending and winding conditions.

Adjustable winding time according to wire size prevents sample damage.

Provides reliable data for both electrical and mechanical performance assessments.

Accessories

(1) Mandrels (17 sizes)

(2) Through-line sleeves (10 sizes)

(3) Electric drive motor

(4) Low-temperature chamber

(5) Control panel with adjustable winding settings

Parameters

Parameter	Specification
Working Temperature	-40℃ ±1℃
Mandrel Diameter	D ≈ 4–5 × wire diameter
Low-Temperature Sample Diameter	Φ2.5–12.5 mm
Winding Speed	1 turn / 6 seconds
Samples per Run	1–2 pieces
Winding Rod Diameters	Φ2.5. Φ4. Φ5. Φ6. Φ7. Φ10. Φ12. Φ14. Φ16. Φ18. Φ20. Φ24. Φ32. Φ35. Φ38. Φ50 mm (17 rods total)
Through-Line Sleeves	Φ1.2. Φ2. Φ2.5. Φ3.5. Φ5. Φ6. Φ10. Φ12. Φ14.5. Φ16 mm
Sample Winding Turns	2–5 turns; winding time set according to mandrel diameter (max 36s)
Operation Mode	Electric
Power Supply	AC 220V ±10%, 20A, 50Hz

Test Procedures

Precondition wire samples at the target low temperature.

Select the appropriate mandrel and through-line sleeve based on wire diameter.

Mount the wire on the mandrel and set winding parameters (speed, turns, and time).

Activate the electric drive to perform winding and low-temperature bending.

Observe wire behavior and record any insulation cracks, conductor breaks, or deformation.

Repeat for additional samples as needed.

Maintenance Information

Keep the low-temperature chamber clean and frost-free.

Inspect mandrels, sleeves, and drive components regularly.

Periodically calibrate temperature and timing controls.

Lubricate moving parts according to manufacturer instructions.

Other supplier products

	Wear Track Profilometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com A wear profiler is a device used to measure the characteristics of worn surfaces, providing...
	Spectrophotometer tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement s...
	Advanced thermal self-ignition tester equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests an...
	IEC Standard Flat Panel Xenon Aging Test Equipment OEM Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 1865-2009 Paints and Varnishes - Artificial Weathering and Ar...
	Qinsun Ci xenon lamp aging test chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...