Smoke Density Tester Manufacturer | ASTM E662 & ISO 5659-2 Smoke Density Test Chamber Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Purpose
Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment.
Parameters
| Burning lamp | for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box; |
| Photoelectric system | light source for the lamp, power 15W, operating voltage 6V; |
| Exhaust system | the machine is equipped with a strong fan, after the test, the exhaust can be discharged outdoors; |
| Smoke density measurement range | 0 ~ 100%; |
| Smoke density measurement accuracy | ± 3%; |
| Receiver | for the silicon photovoltaic cells, light transmission rate of 0% for the passage of light, light transmission rate of 100% light without cover completely through; |
| Main burner working pressure | 276KPa (adjustable); |
Accessoriess
The main accessories of a smoke density tester include the following categories, and their functions are briefly described below:
Smoke Box: As the core component of the tester, it is used to contain the sample and collect the smoke generated during combustion.
Combustion System: Includes main/auxiliary dual burners, nozzles, igniters, etc., used to provide a stable flame to ignite the sample.
Photoelectric Detection System: Composed of a light source (such as a bulb or laser), photodetectors (such as silicon photocells or photomultiplier tubes), filters, etc., used to measure the degree of light attenuation by smoke, thereby calculating smoke density.
Exhaust System: Includes exhaust fans, exhaust ducts, etc., used to exhaust exhaust gases outdoors after the test, maintaining a clean testing environment.
Sample Clamp: Used to fix the sample, ensuring its stability during combustion.
Standard Filter: Used to calibrate the instrument, ensuring the accuracy of measurement results.
Control Software and Data Acquisition System: Used to control the testing process, collect data, and generate test reports.
Other auxiliary accessories: such as power cord, rubber tubing, medium pressure valve, USB flash drive (containing device software program), instruction manual, certificate of conformity, etc.
Test Procedures
The operation method of a smoke density tester includes the following steps:
Installation Check: Ensure the smoke density tester's battery is charged and the sensor is clean. Check if the environmental conditions of the test area meet the requirements.
Parameter Setting: Select the test mode, set the time interval, and determine the test range as needed.
Aiming at the Smoke Source: Aim the tester's sensor at the smoke source or emission source in the test environment, ensuring the sensor can accurately receive the scattered light from smoke particles.
Maintaining a Stable Position: Ensure the accuracy of the test results by avoiding vibration and human interference.
Data Recording: After the test, review the results and record and save the data as needed.
Regular Calibration: Regularly calibrate the smoke density tester to ensure the accuracy of the test data.
Sensor Cleaning: Clean the sensor regularly to prevent dust, oil, or other impurities from affecting the test results.
Send product request
Other supplier products
 |
Closed - Space Tester for Aerosol Sprays | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good... |
 |
Bursting strength instrument for geosynthetics | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G229P Pneumatic Fabric Bursting Strength Tester is used to measure the bu... |
 |
ISO/ASTM Compliant FTIR Smoke Toxicity Test Apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports smoke toxicity testing and gas analysis in accordance with t... |
 |
Abrasive Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Abrasive wear testing machines are mainly used to evaluate the surface wear performance of ... |
 |
Resistance Tester for Molten Metal Droplet (Splash) Impact Performance | Whats/App: +86 156 1874 6768 Web: standard-groups.com Performance and Standards: This resistance tester for molten metal droplet (splash) impact... |
