ASTM D5865 Oxygen Bomb Calorimeter Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
|
Powersupplyvoltage |
AC220V±10%50Hz |
|
Bombcapacity |
(300±50)ml |
|
Oxygenbombpressurerange |
0.5~3.5MPa,noleakage.Thebombpressure21Mpa |
|
AccuracyofTimer |
0.5s |
|
Maximumpower |
0.5KW |
|
Ambienttemperature |
(10~35)ºC |
|
Ambienthumidity |
≤80%RH |
|
Heatcapacityoftheinstrument |
about10000J/K |
|
Heatrepeatabilityerror |
≤0.2% |
|
Temperaturerange |
(4.5-50)ºC |
|
Temperaturedetection |
0.0001ºCresolution,usingthePT100sensor |
|
Innercylindervolume |
2000ml |
|
Motorpower |
3W |
|
stirringspeed |
theinnertube(375r/min) |
Test Procedures
1. Preparation
Before using the building materials combustion value tester, some preparatory work must be done. Identify the building material samples to be tested, prepare the necessary testing tools and materials, and ensure the equipment is functioning properly.
2. Sample Preparation
Cut the building material samples to be tested into appropriate sizes and shapes, ensuring that the surface is flat and free from obvious damage or deformation. Clean the sample surface to remove dust and impurities to avoid affecting the test results.
3. Equipment Operation
a. Turn on the power switch of the building materials combustion value tester, ensuring that the equipment is properly powered. Select the appropriate test mode and parameter settings according to actual needs.
b. Place the sample on the test platform, ensuring a tight fit to prevent air circulation. Start the test program and begin the test. During the test, observe the changes in the instrument data and maintain stable operation of the equipment.
4. Recording and Analysis of Results
After the test is completed, record the relevant data and test results. Analyze and compare the data according to the actual situation. Scientifically interpret the results and draw conclusions. Based on the test results, evaluate the combustion performance of the building materials and determine whether they meet the relevant standard requirements.
Send product request
Other supplier products
 |
Benchtop Heat Release Apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with major international fire-reaction standards, including:... |
 |
Dry Sand Rubber Wheel Wear Test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmets Acceleration Impact & Penetration Tester is a dual-mode testing inst... |
 |
Purity Analysis System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Production： The cleanliness analysis system fully complies with the requirements of standa... |
 |
Shoe bending Angle tester丨Shoe bending Angle test mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidi... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
