Rock Wool Thermal Load Test Device Manufacturer | EN 13162 & ASTM C411 Insulation Material Testing Equipment
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Description |
|---|---|
| Control Interface | Seven-inch full-color touch screen, multi-point program heating |
| Ambient Conditions | Temperature: Room temperature to 40℃; Relative humidity: ≤75% |
| Working Voltage | AC 220V±10V, 50HZ |
| Power Specifications | Total power: 2.5KW; Heating power: 1000W |
| Temperature Measurement Range | Room temperature to 900°C |
| Heating Rate | From room temperature to 400℃: 5°C/min; From 400℃ to 800℃: 3°C/min |
| Control System | Single-chip computer with multi-point program heating |
| Fixture Material | Stainless steel, anti-corrosion |
| Heat Source | Hot plate |
| Sample Pressure | 490pa |
| Test Barrel Dimensions | 48mm±1mm in diameter |
| Equipment Weight | 50 Kg |
Test Procedures
1. Place the support block in the center of the furnace, then place the sample tube containing the sample on the support block (sample size defaults to 80mm). Insert the pressure rod into the top of the sample tube. Note that the pressure rod should be allowed to fall naturally without applying any force.
2. Install the displacement sensor above the pressure rod, passing the pressure rod through the circular hole on the sensor housing. Adjust the sensor so that the displacement meter displays a value between 10 and 15; then tighten the sensor beam screws.
3. After adjusting the sensor, press "Start" on the control panel. The experiment begins, and the "Start" button turns green.
4. When the pressure rod's downward displacement reaches the set value, the experiment ends, the "Stop" light illuminates, and the experiment is complete.
5. After the experiment, press the "Save" button. A storage interface will appear. Click the box next to the experiment name to bring up the keyboard interface to edit the name you want to save. Press the OK button to return to the storage interface and click "Save Data". The data can be viewed in the historical data interface after saving.
6. If there are any problems during the experiment, you can also press "Stop" to cancel the experiment.
Send product request
Other supplier products
 |
Digital display electronic ink viscosity meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com How it works: The working principle of the digital display electronic ink viscosity meter ... |
 |
Textile Far Infrared Emissivity Tester Manufacturer Direct Sale Factory Price | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Quality control and performance evaluation of natural fibers suc... |
 |
High Precision Surgical Needle Strength Testing Instrument Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Penetration and Bending Strength Tester is a device used to... |
 |
Automatic Reaction Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers th... |
 |
Aerospace Fabric UV Stabilization Analyzer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile UV Protection Performance Tester is a high-precision optical inst... |
