VCM G2
VCM G2 adopts full digital laser galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, easy to debug. Modular design, easy to assemble. According to customer requirements, we can choose lenses with different aperture, high positioning accuracy and small drift. Mainly used for dynamic focusing, can be combined with the laser galvo scan head to form 3D modules, widely used in 3D marking, 3D printing, large area processing and other laser marking applications.
Key Features Of Vcm G2
The VCM G2 adopts a new mechanical design that cleverly converts the rotary motion of the galvanometer into linear motion
The dynamic following error is less than 1.5ms, and the response speed is improved by more than 50% compared to traditional voice coil motors
All-digital motor drive scheme, stable performance
Specifications Of Vcm G2
|
|
VCM G2 |
|
Input Beam Aperture（mm） |
≤22 |
|
Output Beam Aperture（mm） |
|
|
Stroke（mm） |
9 |
|
Tracking Error（ms） |
|
|
Typical Speed (mm/s) |
≤100 |
|
Focus speed（m/s） |
/ |
|
Repeatability (μm) |
＜1 |
|
Nonlinearity（%） |
2 |
|
Long-Term Drift Over 8 hours (μm) |
＜10 |
|
Power Requirement |
±15VDC, ≥3A |
|
Digital Interface |
XY2-100 |
|
Operation Temperature（℃） |
25±10 |
Galvanometer Application
Laser Marking
Laser Welding
Laser Drilling
Laser Cutting
Micromachining
Medical Aesthetic
Ophthalmic Imaging
3D Printing
Lithium Battery
Hans scanner independently develops and produces a series of laser scanning heads (7mm, 10mm, 14mm, 20mm, 30mm, 50mm), voice coil motor and galvanometer system based on motion control technology, including 3D large area dynamic focusing system, high power galvanometer welding system, 5-axes drilling galvanometer, 4-axes platform linkage galvanometer, polygon scanning galvanometer, medical aesthetic fractional galvanometer, and weld tracking detection system.
Send product request
Other supplier products
 |
Scan Heads | UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported si... |
 |
Ultra-galvo Scanner | The galvanometer scanner laserusing photoelectric sensor as feedback system is characterized by high repetition accuracy and linearity, and high co... |
 |
3-axis Galvo Scan Head | 3-axis Galvo Scan Head The large-format 3D laser scanner headis free of the processing range limits of 2D field lenses, and can be flexibly select... |
 |
5-axis Laser Micromachining System | The ordinary laser micromachiningsystem can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole proc... |
 |
Laser Lens | Common Fθ lens is a series of general lens used in laserfields. The common F-theta lens has developed into the 3th generation product after e... |
