.

high performance 254 smo liquid semi welded alfa laval plate evaporator

Product principle

The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configured compressor, then raise the pressure and temperature to a certain range, and finally transfer it to the relevant heating chamber of evaporator as heating steam. Finally, to perform the condensation heat release program, so that it can help the latent heat of the steam and the recycling can be effectively obtained.

Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar

Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN500

Plate thickness:0.4mm;Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM

Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.

Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.

Advantages
Plate evaporator

High heat transfer efficiency

The plate evaporator is ingenious in design, so the heat transfer efficiency is higher than that of the general evaporator. Generally, the plate evaporator area only needs about one-half of the tube evaporator then can achieve the same evaporation effect.

Plate evaporator

Compact overall structure

The whole structure is compact, floor space is small, and there is no need to invest too much manpower and material resources in the later use process. For some maintenance work, it only needs to be carried out in the original space range, and it's very simple whether it is disassembled or installed .

Plate evaporator

Diversification of components

The heat exchange area can be effectively adjusted according to the customer's needs: now the heat exchange area of different evaporators has different ranges, since the heat exchanger plates can be disassembled, so multiple components with multiple skills and more new functions can be provided through adjusting number of plates and changing relative flow path.

Plate evaporator

Small heat loss

Because this type of equipment is compact in structure and relatively light in weight, compared with tubular evaporators, it also reduces heat loss, and such equipment usually does not need to be insulated.

Plate evaporator

Less pressure loss

Under the same heat transfer coefficient condition, such evaporator equipment can control the pressure loss within a certain range by rotating a reasonable flow rate.Compared with tubular evaporator,it can reduce 2/3 pressure loss.

Plate evaporator

Stable and safe operation

Different sealing procedures are designed on the sealing device between the plates, and signal holes are also arranged. Once there is leakage or other malfunction, the safety alarm will work.

Product Display
  • Plate evaporatorSemi welded plate heat exchanger
  • Plate evaporatorSemi welded plate heat exchanger
  • Plate evaporatorSemi welded plate heat exchanger


Send product request

To: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

semi welded plates and gaskets for plate heat exchanger refrigeration ammonia
semi welded plates and gaskets for plate heat exchanger refrigeration ammonia Product Feature All sealed edges of the two corrugated sheets are laser welded into "sheet pairs" to form welded channels; each pair of sheets is...
sondex replace plate to heat exchanger hastelloy C-276 distribution
sondex replace plate to heat exchanger hastelloy C-276 distribution Product Feature 1.Using ultra-fine mesh numerical simulation technology to make the plate flow and heat transfer performance superior. 2.Select d...
funke PHE plates and gaskets for plate heat exchanger steam to water HNBR ss304
funke PHE plates and gaskets for plate heat exchanger steam to water HNBR ss304 Product Feature 1.Off-set design, combined into flow channels to provide economical and reasonable . 2. Plates have different corrugation angles,...
 Alfa Laval plate and gasket P16 P26 P36 fresh water heat exchanger
Alfa Laval plate and gasket P16 P26 P36 fresh water heat exchanger As a Chinese plate heat exchanger manufacturer, we focus on plate heat exchanger, all kinds of plates and gaskets producing. Through 13 years of de...
ss 304 alfa laval sulfuric acid double wall plate heat exchanger manufacturer
ss 304 alfa laval sulfuric acid double wall plate heat exchanger manufacturer Product principle The double wall plate heat exchanger plate is welded integrally with two thin plate pieces along the corner hole of each pair o...
All supplier products

Same products

  HORIZONTAL  RADIATOR FOR GAS GENSET
HORIZONTAL RADIATOR FOR GAS GENSET Seller: Xiangyang hero city thermalsys Co.,Ltd Silent fan, each fan can be designed to be controlled separately according to requirements, round...
  HORIZONTAL  RADIATOR FOR GAS GENSET
HORIZONTAL RADIATOR FOR GAS GENSET Seller: Xiangyang hero city thermalsys Co.,Ltd Silent fan, each fan can be designed to be controlled separately according to requirements, round...
Double Door Beverage Cooler
Double Door Beverage Cooler Seller: Shengzhou redbowl refrigeration equipment Co., Ltd. Redbowl Refrigeration Equipment Co., Ltd is leadingChina commercial refrigerator and free...
FHC136 Water Cooled Plate Heat Exchanger
FHC136 Water Cooled Plate Heat Exchanger Seller: Zhejiang Forwon Plate Heat Exchanger Co., Ltd Brand Name:Forwon Model Number:FHC136 Place of Origin:Zhejiang, China (Mainland) Structure:Plate ...
Boxed Type Air-cooled Chiller
Boxed Type Air-cooled Chiller Seller: SCY chiller It is manufactured by modern advanced technology with excellent quality and beautiful appearance....