Mechanical seal for pump---H75FII balance seal
Balance seal compensates for higher pressures by locating faces such that stuffing box pressure has less effect on face closure.
Balance mechanical seal such as this type of RCH75FII seal,
Operating conditions
Temperature: -20 to +200°C
Pressure: ≤2.5MPa
Speed: ≤20m/s
Materials
Stationary ring: sic, ceramic etc.
Rotary ring: carbon graphite, sic, etc.
Secondary seal: NBR, EPDM, Viton
Others: SS304, SS316, etc.
Mediums: water,oil, acides, alkali with low corrosion, etc.
Size: 14mm to 95 in metric available
Other supplier products
|
|
MFL85F metal bellow seal |
MFL85F with pumping screw
single seal
metal bellows
independent
MFL85F with pumping screw
single seal
metal bellows
independent
MFL85F, its dimens... |
|
|
Mechanical Seals for Dyeing Machines TXT |
Dyeing Machines seal TXT
Mechanical seals for winch and pump.
Mechanical Seals for Dyeing Machines TXT
Widely used for... |
|
|
Textile Mechanical Seal 250 |
Textile Mechanical Seal most types and sizes are available off stock.
Special designs can be manufactured upon request.
... |
|
|
Cartridge mechanical seal |
Cartridge mechanical seal
1. Apply for grundfos pump
2. Balanced seal
3. easy to replace without dismantling the pump parts ... |
|
|
silicon carbide |
1. seal material
2. reaction sic bonded, sintered sic
3. used as seal faces, bearings, bushings, sleeve, rod, nozzles, etc.
silicon carbi... |
All supplier products
Same products
