Bright Annealed Tubes
Bright Annealed Tubes Description
Bright annealed stainless steel tubingis a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainless steel tubecan be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainlesssteel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the annealed tubing with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is bright annealed stainless' s special advantage, compared with the regular one.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel offers discount bright annealed seamless steel pipe used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealing Advantages
Bright Annealed Tubes Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubingsizes:
Bright Annealed TubeMaterials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Fe |
Al |
Co |
Zr |
Nb |
Tu |
Va |
|
|
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
||||||||||
|
Nickel Alloy |
|||||||||||||||||||
|
Inconel 600/No6600/2.4816 |
1 |
14-17 |
≧72 |
||||||||||||||||
|
Inconel 600/No6601/2.4851 |
21-25 |
58-63 |
1 |
||||||||||||||||
|
Inconel 690/No6690 |
27-31 |
58 |
|||||||||||||||||
|
Inconel 625/No6625/2.4856 |
20-23 |
≧58 |
≦0.4 |
5 |
≦0.4 |
||||||||||||||
|
Inconel 718/No7718/2.4668 |
17-21 |
50-55 |
Remainder |
||||||||||||||||
|
Incoloy 800/No8800/1.4876 |
1 |
19-23 |
30-35 |
≧39.5 |
|||||||||||||||
|
Incoloy 800H/No8810/1.4958 |
1 |
19-23 |
30-35 |
≧39.5 |
1 |
||||||||||||||
|
Incoloy 825/No8825/2.4858 |
1 |
38-46 |
≧22 |
||||||||||||||||
|
C-276/No10276/2.4819 |
1 |
Balance |
3-4.5 |
||||||||||||||||
|
Monel 400/No4400/2.4360 |
2 |
≧63 |
28-34 |
||||||||||||||||
|
Monel K-500/No5500 |
63 |
27-33 |
2 |
||||||||||||||||
|
Alloy 20/No8020/2.4660 |
1 |
2 |
19-21 |
32-38 |
Balance |
8C-1 |
|||||||||||||
|
Alloy 28/No8028 |
1 |
26-28 |
30-34 |
Remainder |
|||||||||||||||
|
Duplex Steel |
|||||||||||||||||||
|
S31803/1.4462 |
1 |
2 |
21-23 |
||||||||||||||||
|
S32205/1.4462 |
1 |
2 |
22-23 |
||||||||||||||||
|
S32750/1.4410 |
24-26 |
||||||||||||||||||
|
S32760/1.4501 |
1 |
1 |
24-26 |
||||||||||||||||
|
Austenitic |
|||||||||||||||||||
|
304/1.4301 |
1 |
2 |
18-20 |
8-10.5 |
|||||||||||||||
|
304L/1.4307 |
1 |
2 |
18-20 |
||||||||||||||||
|
304H/1.4948 |
1 |
2 |
18-20 |
||||||||||||||||
|
316/1.4401 |
1 |
2 |
16-18 |
||||||||||||||||
|
316L/1.4404 |
1 |
2 |
16-18 |
||||||||||||||||
|
316H/1.4919 |
1 |
2 |
16-18 |
||||||||||||||||
|
316Ti/1.4571 |
1 |
2 |
16-18 |
||||||||||||||||
|
321/1.4541 |
1 |
2 |
17-19 |
||||||||||||||||
|
321H/1.4878 |
1 |
2 |
17-19 |
H |
|||||||||||||||
|
317/1.4449 |
1 |
2 |
18-20 |
||||||||||||||||
|
317L/1.4438 |
1 |
2 |
18-20 |
||||||||||||||||
|
347/1.4550 |
1 |
2 |
17-19 |
||||||||||||||||
|
347H/1.4912 |
1 |
2 |
17-19 |
||||||||||||||||
|
310S/1.4845 |
1 |
2 |
24-26 |
||||||||||||||||
|
310H/1.4845 |
1 |
2 |
24-26 |
||||||||||||||||
|
N08904(904L)/1.4539 |
1 |
2 |
19-23 |
||||||||||||||||
|
S31254(254Mo)/1.4547 |
1 |
||||||||||||||||||
Bright Annealed Tube Pressure Calculation Formula
Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)
Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)
Steel tube pressure P<7Mpa coefficient S=8
7< steel tube pressure P<17.5 coefficient S=6
The pipe pressure P>17.5 coefficient S=4
Send product request
Other supplier products
 |
Concentric Reducer | we are suppliers, manufactures, and exporters of concentric reducers, a type of pipe reducer that fastens pipe sections on the same axis and is con... |
 |
Bright Annealed Tubes | Product description Bright Annealed Stainless Steel TubingDescription The traditional annealing approach is performed in a so referred to as open f... |
 |
STAINLESS STEEL TUBING | As a large SSsteel tubemanufacturer, Huangshang Steel offer various tubing to meet different application requirements like ba tubing, ep tubing, mp... |
 |
Tube Caps | Product description Tube cap, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside th... |
 |
Precision Tubes | Product description Precision Tubes Description Precision steel pipefeatures in large size, high precision, smooth surface inside and outside, pr... |
Same products
 |
Emergency Tire Chains Trucks | Seller: Zhejiang Pujiang Bohu Chain Stock Co., Ltd. | Used in snowy days when in an emergency. Ladder pattern and square link, better ... |
 |
Male Thread Nickel Plated Brass Butterfly Ball Valve | Seller: Zhejiang Huibo Valve Technology Co., Ltd. | Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba... |
 |
oller Bearing LAN Cable strander equipment 527468 with cage | Seller: JinHang Precision Bearing Co.,LTD | Special bearings527468 for tubular stranding machines running at high speeds have increased accur... |
 |
Non standard roller bearing 535550 for strander machine | Seller: JinHang Precision Bearing Co.,LTD | Bearing description:one row cylindrical roller bearing Bearing factory model:535550 China Bearing... |
 |
Special bearing 527467P5 for 560CT tubular strander equipment | Seller: JinHang Precision Bearing Co.,LTD | Bearing description:single row cylindrical roller bearing Bearing factory model number: 527467 Ch... |
