Coiled Tubing
Coiled Tubing Description
Huashang seamless coiled tubing we produce can reach more than 1000 meters, compared with other coiled tubing manufacturers, which particularly reduces the tubing unions and connection for the duration of the installation, making the set up extra convenient, highly reduces the complete cost in installation, and additionally the maintenance cost.
If you choose to reduce the risk of leaks in the instrument of the hydraulic system. The concentric coiled tubingwill be your first and excellent choice. Especially for the scenario of vertical installation. As you limit the tubing unions and connections, it totally improves the integrity of the total system, improves the protection and safety.
We all recognize well that due to the fact of the constrained coiled tubing sizesof container in sea shipment, normally, we only can ship seamless tube with size no longer more than 15 meters, but for coiled tubing, even size accomplishing extra than a thousand meters, it additionally can be shipped easily in container, the capillary coiled tubingis level wound per coil, then packed by plywood case, also it can be level wound on timber or plastic spools for the smaller dimensions.
Coiled Tubing Advantage
Coiled Tubing Sizes
The welded coil tubing sizes:
OD: 0.19mm---25.4mm
The seamless coiled tubing typical sizes
OUTSIDE Diameter(mm) |
Wall Thickness (mm) |
Inside Diameter(mm) |
6 |
1 |
4 |
10 |
1 |
8 |
10 |
7 |
|
12 |
1 |
10 |
12 |
9 |
|
12 |
2 |
8 |
14 |
1 |
12 |
14 |
11 |
|
14 |
2 |
10 |
16 |
1 |
14 |
16 |
13 |
|
16 |
2 |
12 |
Coiled Tubing Materials
Austenitic Stainless Steel Coiled Tubing Pipe:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H, TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo.S30432, S31042, N08367
Duplex & Super Duplex Steel coiled tubing pipe:
S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel Coiled Tubing Pipe:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Coiled Tubing Standard
ASTM A213, ASTM A269, EN10216-5TC1, D4/T3
Heat Treatment: Bright Annealed
NDT:Eddy Current or Hydraulic test or UT
Coiled tubing is applied in Control line tubing in oil and gas well, Instrument tubing, chemical injection tubing line, Pre-insulated Tubing, Electric Heating or Steam Heatiing Tubing Line, Heater Tubing line.
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Fe |
Al |
Co |
Zr |
Nb |
Tu |
Va |
|
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
||||||||||
Nickel Alloy |
|||||||||||||||||||
Inconel 600/No6600/2.4816 |
1 |
14-17 |
≧72 |
||||||||||||||||
Inconel 600/No6601/2.4851 |
21-25 |
58-63 |
1 |
||||||||||||||||
Inconel 690/No6690 |
27-31 |
58 |
|||||||||||||||||
Inconel 625/No6625/2.4856 |
20-23 |
≧58 |
≦0.4 |
5 |
≦0.4 |
||||||||||||||
Inconel 718/No7718/2.4668 |
17-21 |
50-55 |
Remainder |
||||||||||||||||
Incoloy 800/No8800/1.4876 |
1 |
19-23 |
30-35 |
≧39.5 |
|||||||||||||||
Incoloy 800H/No8810/1.4958 |
1 |
19-23 |
30-35 |
≧39.5 |
1 |
||||||||||||||
Incoloy 825/No8825/2.4858 |
1 |
38-46 |
≧22 |
||||||||||||||||
C-276/No10276/2.4819 |
1 |
Balance |
3-4.5 |
||||||||||||||||
Monel 400/No4400/2.4360 |
2 |
≧63 |
28-34 |
||||||||||||||||
Monel K-500/No5500 |
63 |
27-33 |
2 |
||||||||||||||||
Alloy 20/No8020/2.4660 |
1 |
2 |
19-21 |
32-38 |
Balance |
8C-1 |
|||||||||||||
Alloy 28/No8028 |
1 |
26-28 |
30-34 |
Remainder |
|||||||||||||||
Duplex Steel |
|||||||||||||||||||
S31803/1.4462 |
1 |
2 |
21-23 |
||||||||||||||||
S32205/1.4462 |
1 |
2 |
22-23 |
||||||||||||||||
S32750/1.4410 |
24-26 |
||||||||||||||||||
S32760/1.4501 |
1 |
1 |
24-26 |
||||||||||||||||
Austenitic |
|||||||||||||||||||
304/1.4301 |
1 |
2 |
18-20 |
8-10.5 |
|||||||||||||||
304L/1.4307 |
1 |
2 |
18-20 |
||||||||||||||||
304H/1.4948 |
1 |
2 |
18-20 |
||||||||||||||||
316/1.4401 |
1 |
2 |
16-18 |
||||||||||||||||
316L/1.4404 |
1 |
2 |
16-18 |
||||||||||||||||
316H/1.4919 |
1 |
2 |
16-18 |
||||||||||||||||
316Ti/1.4571 |
1 |
2 |
16-18 |
||||||||||||||||
321/1.4541 |
1 |
2 |
17-19 |
||||||||||||||||
321H/1.4878 |
1 |
2 |
17-19 |
H |
|||||||||||||||
317/1.4449 |
1 |
2 |
18-20 |
||||||||||||||||
317L/1.4438 |
1 |
2 |
18-20 |
||||||||||||||||
347/1.4550 |
1 |
2 |
17-19 |
||||||||||||||||
347H/1.4912 |
1 |
2 |
17-19 |
||||||||||||||||
310S/1.4845 |
1 |
2 |
24-26 |
||||||||||||||||
310H/1.4845 |
1 |
2 |
24-26 |
||||||||||||||||
N08904(904L)/1.4539 |
1 |
2 |
19-23 |
||||||||||||||||
S31254(254Mo)/1.4547 |
1 |
We provide 1' stainless steel coil tubing, coil tubing for sale, contact us to buy them.
Send product request
Other supplier products
Long Neck Flanges | Product description Long Neck Flanges Features Forming: forged WELDING NECK RISE FACE REDUCER FLANGE(Long NECK ) Long Neck Flanges Materials ... | |
Stub End | Product description We are a stub end manufacturer, supplier and exporter for stub end pipe fitting, stub end divided into Europe system, Japan sys... | |
Forged Rings | Product description Forged Rings Features Forming type :forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 Size :1... | |
Hexagon Steel Tubing | Product description Hexagon steel tube is the general name of all section shape of steel tube except circular tube. There are welded shaped tubes a... | |
Hydraulic Tubing | Product description Hydraulic Tubing SteelDescription Huashang Hydraulic tube in a comprehensive range of corrosion-resistant stainless steels an... |
Same products
Emergency Tire Chains Trucks | Seller: Zhejiang Pujiang Bohu Chain Stock Co., Ltd. | Used in snowy days when in an emergency. Ladder pattern and square link, better ... | |
Male Thread Nickel Plated Brass Butterfly Ball Valve | Seller: Zhejiang Huibo Valve Technology Co., Ltd. | Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba... | |
oller Bearing LAN Cable strander equipment 527468 with cage | Seller: JinHang Precision Bearing Co.,LTD | Special bearings527468 for tubular stranding machines running at high speeds have increased accur... | |
Non standard roller bearing 535550 for strander machine | Seller: JinHang Precision Bearing Co.,LTD | Bearing description:one row cylindrical roller bearing Bearing factory model:535550 China Bearing... | |
Special bearing 527467P5 for 560CT tubular strander equipment | Seller: JinHang Precision Bearing Co.,LTD | Bearing description:single row cylindrical roller bearing Bearing factory model number: 527467 Ch... |