KRD30 CONSTANT ACCELERATION TESTER (BOX TYPE)
KRD30 series constant acceleration tester is a box-type structure centrifugal constant acceleration test machine with the characteristics of reliable operation, convenient maintenance, multiple functions, and easy control and adjustment. This constant acceleration test equipment is applicable to provide a test of structural integrity for electronic components, small components, and other electrical and electronic products whether the structure adaptability and performance are in good condition when subjected to forces produced and the satisfactory performance of components, products, by steady-state acceleration environments (other than gravity), such as occur in moving vehicles, especially flying vehicles, rotating machine and projectiles. KRD30series centrifugal constant acceleration testing machine can also be used to determine the effect of constant acceleration on electronic devices and also be used as a high-stress test to determine the structural strength limit values.
KRD30 Constant Acceleration Test Equipment FEATURES
Box-type structure eliminates security and installation foundation
Flexible control mode: fully closed-loop digital network (remote) automatic control + manual control, high control precision
Fully automatic computer remote real-time control interface + user-friendly display interface, the acceleration test can automatically complete based on the Windows system Self-test design: the self-checking functions realized by this system mainly include function tests and accuracy test
Wide range of acceleration: acceleration tests can be realized according to different requirements of test products
Complete security protection function: there are three types of protection levels: software-level protection, electrical level protection, and mechanical level protection; completely protect the safety of the device and improve the reliability of the whole system
The software of the acceleration test equipment can achieve a single section, multi-section (1-10 points continuous intersection) acceleration test control
TECHNICAL SPECIFICATIONS OF KRD30 CONSTANT ACCELERATION TESTER
|
Model |
KRD |
KRD |
KRD |
KRD |
KRD |
KRD |
KRD |
KRD |
|
Parameters |
30-3 |
30-5 |
30-10 |
30 - 20 |
30- 2M |
30-3M |
30 - 4M |
30- 8M |
|
3×6 |
5x4 |
10×2 |
20×2 |
|||||
|
Acceleration (g) |
1~500 |
1~100 |
200~20k |
200~ 30k |
200~ 4Ok |
200~80k |
||
|
200 |
300 |
/ |
||||||
|
lnstallation Radius (mm) |
200 |
500 |
130 |
|||||
|
Test Direction |
±X,±Y±Z |
|||||||
|
Launch/Stop Time (Min) |
≤3 |
≤5 |
||||||
|
Continues Worktime (Min) |
60 |
5 |
||||||
|
Acceleration Accuracy (%) |
≤3 |
|||||||
|
Overall Dimension (mm) |
1100×1100×1200 |
165O×1350×1100 |
1000×1000×1200 |
|||||
|
Collector Ring |
Optional according to user requirements |
|||||||
|
Weight (kg) |
1000 |
1500 |
1000 |
|||||
|
Power Supply |
AC380V±10%,50/60Hz |
|||||||
|
Control Mode |
Fully closed-loop digital network (remote) automatic control + manual control |
|||||||
|
Remarks |
The current collector and the control precision can be in accordance the related standards or customer requirements |
|||||||
|
Working Environment |
Temperature Range 0~40°C,Humidity<80%(no condense) |
|||||||
|
Standards |
MIL-STD-810F IEC68-2-7 MIL-STD-202 MIL-STD-750MIL-STD-883 |
|||||||
CONTROL SYSTEM OF KRD30 CONSTANT ACCELERATION TESTER
The system is a speed control system composed of a computer, board card, display, printer, etc., which can complete the set of test parameters, data acquisition calculations and proportional-integral calculations, display and printing functions, signal acquisition, system security protection, etc.
From the interface, you can observe the product's acceleration running curve, rotating arm speed, product installation radius, running time, and other test information.
KRD30-03/05 CONSTANT ACCELERATION TEST TABLE
KRD30-03 /05 series constant acceleration tester is a small standard rotation table, KRD30-03 is 6-station and KRD30-05 is 4-station.
KRD30-03 /05 series constant acceleration tester table mainly includes installation turntable, drive shaft, shaft support frame, drive system composition, etc.
KRD30-10/20 CONSTANT ACCELERATION TEST TABLE
KRD30-10/20 series constant acceleration tester is a box-type rotating arm test machine; both models are two-station.
The main structure of the constant acceleration tester table is composed of the rotating arm, drive shaft, shaft support frame, drive system composition, etc.
KRD30-2M/3M/4M/8M CONSTANT ACCELERATION TEST TABLE
KRD30-2M/3M/4M/8M series constant acceleration testers are multi-station turntable testers, that use a vacuum system, easy to achieve high-speed motion.
The constant acceleration test machine consists of the following parts: high-speed rotor system, flexible spindle support system, vacuum generation, and detection system, computer control and measurement system, sample clamping system, safety protection detection system, and high-speed rotor cooling system, etc.
CME Technology Co., Ltd. was established in 2006, specializing in the research, development and manufacturing of mechanical environmentand reliability test equipment, our test equipment mechanical products including shock /bump testing machine, drop tester, transportation simulation test table, hydraulic vibration shakers, multi-DOF motion simulation table, centrifugal constant acceleration tester, packaging test machine and etc.
Send product request
Other supplier products
 |
KRD50 TRANSPORTATION SIMULATION VIBRATION TESTING MACHINE | KRD50 transportation vibration testercan replace the actual running automotive test to complete the road transportation simulation test of packaged... |
 |
KRD12 Pneumatic Horizontal Shock Test Machine | KRD12 series shock tester is a pneumatic cylinder driving horizontal shock/bump testing machine with the advantages of ingenious design, high techn... |
 |
Constant Acceleration Tester | WHAT IS CONSTANT ACCELERATION TEST? Centrifugal constant acceleration test is performed to evaluate when components, equipment, and other electric... |
 |
KRD200 Center of Gravity Measurement System | The center of gravity (CG) (or center of mass) of an object is the average location of the weight (or mass). It's a crucial mass property in the fi... |
 |
Transport Simulation Vibration Testing Machine | Transport Simulation Vibration Testing Machine WHAT IS TRANSPORT VIBRATION SIMULATION TESTING? As one important part of the packaging test, the t... |
