1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve
All supplier products
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve
Withdrawal(Extraction) sleeves can be used to mount bearings with a tapered bore on cylindrical seats of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or endplates are not supplied with the withdrawal sleeves.
To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. To do this, particularly where larger bearings are concerned, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut .Basic design
Withdrawal sleeves are slotted and have an external taper of 1:12 except for those in the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for use with wide bearings in the 40 and 41 Dimension Series.
The nuts required for dismounting the withdrawal sleeve are not supplied with the sleeve and must be ordered separately.
Materials
The materials using in withdrawal sleeves are carbon steel with a tensile strength at least 430N /mm2.
Dimensions
The dimensions of withdrawal sleeves are in accordance with ISO 2982-1:1995.
Tolerances
The bore diameter of withdrawal sleeves is to tolerance JS9, the width to h13.
Thread
Withdrawal sleeves up to size 38 have metric threads with 6g tolerances according to ISO 965-3:1998. Larger withdrawal sleeves have metric trapezoidal threads with 7e tolerance according to ISO 2903:1993.
If standard nuts are not used, the threads of nuts for withdrawal sleeves up to size 38 should correspond to tolerance 5H according to ISO 965-3:1998. The threads of nuts for larger withdrawal sleeves should correspond to tolerance 7H according to ISO 2903:1993.
Send product request
Other supplier products
 |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z12C Heave tight coupling Sleeve | 1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z12C Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mec... |
 |
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH39/AH241 Withdrawal Sleeve | 1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH39/AH241 Withdrawal Sleeve Withdrawal(... |
 |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z8 Heave tight coupling Sleeve | 1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z8 Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mecha... |
 |
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH31/AH32 Withdrawal Sleeve | 1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH31/AH32 Withdrawal Sleeve "Withdrawal(... |
 |
Two-Piece Clamping Collar,Two-Piece Clamping Collar with Keyway,Two-Piece Clamping Collar Recessed Screw | Two-Piece Clamping Collar,Two-Piece Clamping Collar with Keyway,Two-Piece Clamping Collar Recessed Screw Two-Piece Clamping Collars are designed to... |
Same products
 |
Tandem roller bearing M4CT3278 with shaft 78x32x110.5mm | Seller: JinHang Precision Bearing Co.,LTD | The tandem roller extruder bearing m4ct3278 that use for PVC screw extruder gearbox, the shaft di... |
 |
Tandem roller bearing F-86722 for Rubber extrusion machine | Seller: JinHang Precision Bearing Co.,LTD | The bearing f-51909 t3ar mainly used in the twin screw plastic extrusion machine gearbox.The bear... |
 |
Tandem roller bearing t6ar3278 for the extruder shaft gearbox | Seller: JinHang Precision Bearing Co.,LTD | The bearing T6 AR 3278 with size 32X78X163.5mm mainly used for the high speed extruder machine ge... |
 |
Tandem roller bearing MTCT2468 for Screw extrude gearbox | Seller: JinHang Precision Bearing Co.,LTD | The bearing M5CT2468 for food/feed/plastic/rubber extrusion machine gearbox use. With high perfor... |
 |
twin screw extruder gearbox used t5ar3278 bearing | Seller: JinHang Precision Bearing Co.,LTD | Bearing T5AR3278 fullsize 32x78x137mm bearing actual picture, Please reference them. Bearing fact... |
