.

Vertical boring machine use XR678052 Crossed roller bearing 330*457*63.5mm

Crossed tapered roller bearing XR678052 contains two sets of races and rollers brought together at high angles with alternate rollers facing in opposite directions. The height of cross section is similar to single-row bearing for conserving space and saving bearing housing material.And the steep-angele,tapered geometry results in a total effective bearing spread much greater than the width of the bearing itself.

Crossed roller bearing code

XR678052

Equal to SKF

615661A

Bearing Dimension

Outer dia:

457 mm

Inner dia:

330 mm

Height:

Precision garde

P4 P5 Available

Rolling

Tapered roller

Spacer material

Super quality Nylon

Outer ring/Inner ring material

GCr15SiMn

Hardness

55-62 HRC

package

Strong wooden case



Send product request

To: JinHang Precision Bearing Co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

MTO-324T Belong to four point contact ball slewing bearing without teeth
MTO-324T Belong to four point contact ball slewing bearing without teeth Slewing bearing type MTO-324T Dimension: mm Outer dia: mm(20.48 inch size) Inner dia: mm(12.75 inch size) Height: mm...
Five-stage cylindrical roller thrust bearing  M5CT1037EA 10x37x99mm
Five-stage cylindrical roller thrust bearing M5CT1037EA 10x37x99mm Tandem thrust bearingsM5CT1037EA are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a suffici...
Plastic extruder gearbox tandem roller bearing  M4CT2264   22x64x102.5mm in stock
Plastic extruder gearbox tandem roller bearing M4CT2264 22x64x102.5mm in stock Tandem Thrust BearingsM4CT2264 can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictio...
VSI 250855 N China slewing ring with teeth 955x710x80mm
VSI 250855 N China slewing ring with teeth 955x710x80mm Description VSI 250855 Nslewing ball bearing Dimension(ODXIDXH) 955x710x80mm Outer diameter(OD) 955mm Inner diameter(ID) 71...
Tandem bearings in large extruder gearboxes M4CT3495 shaft size 34x95x130mm
Tandem bearings in large extruder gearboxes M4CT3495 shaft size 34x95x130mm Tandem thrust bearingsM4CT3495are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficient...
All supplier products

Same products

Cylindrical roller bearing 527272 for strander machine
Cylindrical roller bearing 527272 for strander machine Seller: JinHang Precision Bearing Co.,LTD cylindrical roller bearings Z-527272.ZL with cage are available as non-locating, semi-locating an...
Tubular Stranding machine use bearing 527247
Tubular Stranding machine use bearing 527247 Seller: JinHang Precision Bearing Co.,LTD Bearing description:single row cylindrical roller bearing Service:offer drawing and technical sup...
Tubular Stranding machine use bearing 527462
Tubular Stranding machine use bearing 527462 Seller: JinHang Precision Bearing Co.,LTD The cylindrical roller bearings 527462 have high rigidity, high radial load carrying capacity. B...
Stainless steel wire stranding machine 537024P5
Stainless steel wire stranding machine 537024P5 Seller: JinHang Precision Bearing Co.,LTD The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 537...
Cylindrical roller bearing 527461 for Tubular twister
Cylindrical roller bearing 527461 for Tubular twister Seller: JinHang Precision Bearing Co.,LTD Bearing factory items:Z-527461.ZL Bearing old type: 527461 The bearing z-527461.zl structure:sin...