Cross Tapered Roller Bearing
Mounting of THB Crossed Roller Bearings
When assembling the cross-roller bearing, follow the steps below.
Since the cross-roller bearingis a thin bearing, it tends to tilt as it is installed. To prevent it, gradually drive the cross-roller bearing into the housing or onto the shaft by gently hitting it with a plastic hammer while keeping it horizontal. Be sure to keep hammering it with much care until you hear it fully contact the reference surface.
1） Placing the presser flange onto the cross-roller bearing. Rock the flange several times to match the bolt holes.
2）Insert the presser bolts into the holes. Manually turn the bolts and make sure they do not show skewing caused by misalignment of the bolts.
3）Fasten the presser bolts in three to four steps from temporary to full fastening by repeatedly securing the bolts in the diagonal order, as shown in Fig9. When tightening the separable inner or outer ring, slightly turning the integral outer or inner ring will correct the dislocation between the ring and the body.
For more informationabout tapered roller bearing cross reference chart, please feel free to contact us!
Send product request
Other supplier products
 |
22217 EK Spherical Roller Bearings | Specifications of 22217 EKBearing Designations (Bearing with tapered bore) 22217EK Principal dimensions (mm) d 85 ... |
 |
KR 16 PP/ CF 6 BUUR Cam Follower | Specifications of KR 16 PP/ CF 6 BUUR Cam Follower Designation KR16PP CF6BUUR （Mass）m≈g 18 Dime... |
 |
HK 0606 Drawn Cup Needle Roller Bearing | Specifications of HK 0606Drawn Cup Needle Roller Bearing Designations HK0606 Dimensions(mm) Fw 6 ... |
|
|
Cross Tapered Roller Bearing | Mounting of THB Crossed Roller Bearings When assembling the cross-roller bearing, follow the steps below. Since the cross-roller bearingi... |
 |
21314 E Spherical Roller Bearings | Specifications of 21314 ESpherical Roller Bearings Designations (Bearing with cylindrical bore) 21314E Principal dimensions ... |
Same products
 |
Non standard roller bearing for strander machine 527468.ZL | Seller: JinHang Precision Bearing Co.,LTD | Special bearings527468 for tubular stranding machines running at high speeds have increased accur... |
 |
Offer Non standard roller bearing for strander machine 535550 | Seller: JinHang Precision Bearing Co.,LTD | The bearing 535550 belongs to large bearings that have threaded holes for the location of eye bol... |
 |
Cylindrical roller bearing 527467.ZL Tubular twister machine | Seller: JinHang Precision Bearing Co.,LTD | The dimensional and running tolerances of the bearings with cylindrical bore correspond to tolera... |
 |
Cable strander high speed bearing 808288 factory | Seller: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings 808288 with cage are units comprising solid inner and oute... |
 |
Precision bearing 535549 for Tubular stranding machine | Seller: JinHang Precision Bearing Co.,LTD | High precision bearings 535549 must guide machine parts with high precision and support forces at... |
