Single Row Cylindrical Roller Bearing NU2338M
Single Row Cylindrical Roller Bearing
Part No.: NU2338M
Inner Ring: 190.000mm
Outer Ring: 400.000mm
Width: 132.000mm
Outside Diameter of Inner Ring: 240.000mm
Chamfer: 5
Basic Dynamic Load Rating: 1922KN
Basic Static Load Rating: 2805KN
Limited Speed (rpm): 1296(grease)/1680(oil)
Gross Weight: 85.2kg
Brass Cage
Single row cylindrical roller bearing consists of an inner and outer ring, rollers, and a cage; the outer and inner ring are separable; therefore, this type of bearings are easy to assemble, disassemble and applicable for high-speed rotation cases. Single row cylindrical roller bearing can carry a higher radial load capacity in comparison to same dimension ball bearing. Normally, it is not used to bear an axial load, in the case where there is a rib, the bearing can bear a slight axial load between the end of the rollers and the rib.
Depending on the existence of ribs on their rings, single row cylindrical roller bearings are classified into N, NU, NJ, NUP types.
Type N single row cylindrical roller bearing has two integral flanges on inner ring and a flangeless outer ring. This type of bearings permits axial displacement in double directions of the housing relative to the shaft.
Type NU single row cylindrical roller bearing has two integral flanges on outer ring and a flangeless inner ring. This type of bearings permits axial displacement in double directions of the housing relative to the shaft.
Type NJ single row cylindrical roller bearing has two integral flanges one on the outer ring, and one on the inner ring. This type of bearing can carry a certain amount of axial load in a single direction.
Type NUP single row cylindrical roller bearing has two integral flanges on outer ring, one flange and separable loose flange on inner ring. This type of bearing can carry a certain number of axial loads in double directions.
Other supplier products
|
|
Spherical Roller Bearings 24038 CCK30C3W33 |
Spherical Roller Bearings
Part No.:24038 CCK30C3W33 Inner ring:190.000(mm) Outer ring:290.000(mm) Width:100.000(mm) Chamfer: 2.1 Basic Dynamic Loa... |
|
|
Spherical Roller Bearing 22332MBW33 |
Spherical Roller Bearing 22332MBW33Inner Ring: 160.000mmOuter Ring: 340.000mmWidth: 114.000mmChamfer: 4mmBasic Dynamic Load Rating: 1449KNBasic Sta... |
|
|
Angular Contact Ball Bearing 509098A |
Angular Contact Ball BearingPart No.:509098AInner ring:175.000(mm)Outer ring: 235.000(mm)Width of outer ring:27.000(mm)Width of inner ring: 30.000(... |
|
|
Spherical Roller Bearing 22226MBC3W33 |
Spherical Roller Bearing 22226MBC3W33Inner Ring: 130.000mmOuter Ring: 230.000mmWidth: 64.000mmChamfer:3Basic Dynamic Load Rating: 573KNBasic Static... |
|
|
Spherical Roller Bearing 23052MBW33 |
Spherical Roller Bearing 23052MBW33Inner Ring: 260.000mmOuter Ring: 400.000mmWidth: 104.000mmChamfer: 4mmBasic Dynamic Load Rating: 1470KNBasic Sta... |
All supplier products
Same products
