ZHE JIANG JIA SHAN CBL-504 Solid-lubricating Inlaid Bushing HOT SELL

• 
• 
• 
• 

products descrpition

Products

Oilless or low-oil-contained lubrication means less fuel without refueling, the goal of our research is to ensure that the bearing in such conditions can have good performance and extend its life as much as possible. When self-lubricating bearings are running, the solid lubricants on its surface form a lubricating film by mutual friction .It avoids direct contact between the workpiece and thus well protected against wear parts to extend the service life of the bearings and the workpiece.

Material Properties

● Allows maintenance-free and long-life operation;

● Suitable for high static and dynamic loads;

● With low and smoothly coefficient of friction and without stick-slip effects;

● Suitable for dirty, corrosion, impact load and edge loading;

● The base material provided a good shock-absorbing capacity;

● Can be used over a large temperature range;

● Suitable for reciprocating, rotating and oscillating movement with start frequency and difficulty to form oil film occasions;

● With low wear rate and long life service.

Bearing Feature

The design nowadays requires tremendous demands fro self-lubricating bearing material.Even in the extremely severe work condition and maximum load conditions, it also requires maintenance-free. With the cost of increasing, business equipment reliability and plant operation is also increasing. Metal self-lubricating bearings to meet the long-term maintenance-free and under the conditions of self-lubricating, thus making the design of reliable long-term self-lubricating system possible. Metallic self-lubricating bearing material can be widely used in high load at low speed rotation conditions, swing and linear reciprocating motion, but also applies to the position where traditional lubrication can not be achieved or the ocassion greasing is prohibited, or in special conditions such as dust, shock under load or radiation conditions require long-term and stable use.

Other supplier products

	ZHEJIANG JIA SHAN CBL-FU Powder Metallurgy Oil-retaining Bearing directly deal	Application Characteristics CBL-FU1 its copper oil-retaining bearing, bronze powder in zion as raw material, through the mould pressing, sinte...
	SF-2Y Marginal Lubricating Lead-Free Bush	products descrpition Introduction: SF 2Y Non-lead boundary lubrication bearing is improved on the basis of sf 2X.It can be applied to the field wh...
	CHINA sliding bearing FB-090 BronzeWrapped Bushing JIA SHAN CBL BEARING HOT SEALS	Structure Characteristics and Applications CBL-090 wrapped bronze bearing is made of tin-bronze CuSn8 with its surface punched with diamond oil ...
	ZHEJIANG JIA SHAN CBL-FU Powder Metallurgy Oil-retaining Bearing directly deal	Application Characteristics CBL-FU1 its copper oil-retaining bearing, bronze powder in zion as raw material, through the mould pressing, sinte...
	Jia shan cbl bearing offer EWC0408 fishing reel special bearing	products descrpition Item number: EWC0408 Inner diameter(d) :4mm Outer diameter(D): 8mm Thickness: 8mm Type: one-way needle bearing material:ST14(...

Same products

	Sliding bearings	Seller: Jiashan Shuguang Sliding Bearing Co.,Ltd	Sliding bearings, also known as sliding or plain bearings, are a class of mechanical parts that g...
	FGB Подшипники 2ШСЛ150К, 150*270*160	Seller: FGB (SHANDONG) BEARING MFG CO.,LTD.	FGB (SHANDONG) BEARING MFG CO.,LTD. в основном производит Сферические подшипники скольжения (шарн...
	Шарнирные подшипники ШСЛ120К,размер:120*180*85	Seller: FGB (SHANDONG) BEARING MFG CO.,LTD.	FGB (SHANDONG) BEARING MFG CO.,LTD. в основном производит Сферические подшипники скольжения (шарн...
	FGB Подшипник скольжения ШСЛ80К, размер:80*125*76/70	Seller: FGB (SHANDONG) BEARING MFG CO.,LTD.	FGB (SHANDONG) BEARING MFG CO.,LTD. в основном производит Сферические подшипники скольжения (шарн...
	Подшипники скольжения ШСЛ90К	Seller: JINB Подшипниковая Компания	ОПТОМ продажа подшипников! Пожалуйста выберите подшипники, которые вам нужны: Подшипник ШСП30К П...