slip-on flange ANSI B16.5 150#200
Hubbed flange with flange plate is the same as the steel pipe and pipe fittings into the flanges are connected by fillet welds and equipment or pipeline flanges. Because there is a short neck, so as to improve the strength of the flange to improve the bearing capacity of the flange. So it can be used in a higher pressure pipe. Suitable for PN series Class; PN2.5~PN40 series Class150~Class1500. Chinese Zhangqiu Mingyuan Machinery Co., Ltd. specializing in the production of GB ship standard, Japanese standard, German standard, American Standard, non - standard, European standard, British standard, standard, can meet a variety of harsh conditions, can also provide drawings according to the customer production of flange.
Other supplier products
|
|
AWWA slip-on flange AWWA D22” |
Flange for pressure level is relatively low, the pipeline system pressure fluctuation, vibration and shock are not serious in. Flange welding flang... |
|
|
blind flange ANSI B16.5 150# 350 FF |
The blind flange is one kind of flange which does not have the hole in the middle. One of its work is to seal the end of the pipe, and the other is... |
|
|
blind flange DIN 2527 PN25 DN200 |
The blind flange is one kind of flange which does not have the hole in the middle. One of its work is to seal the end of the pipe, and the other is... |
|
|
blind flange DIN 2527 PN16 DN125 |
The blind flange is one kind of flange which does not have the hole in the middle. One of its work is to seal the end of the pipe, and the other is... |
|
|
GOST slip-on flange BS or UNI or SANS or EN 1092-1 standards |
GOST slip-on flange BS or UNI or SANS or EN 1092-1 standards
Flange for pressure level is relatively low, the pipeline system pressure fluctuation,... |
All supplier products
Same products
