Cold Runner & Hot Runner Plastic Mold
Hot Runner and Cold Runner Mould
Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner thermocouple has two types: standard type J and type K.
COLD RUNNER & HOT RUNNER PLASTIC MOLD TYPES
Multi Cavities Hot Runner Injection Mold
The hot runner will keep the plastic material in liquid in runner and injection gate, the temperature in injection machine barrel and runner are very high which can keep the material in liquid, due to there is heating system surrounded, it will only need to heat the hot runner to request temperature before production, and the hot runner is like the extension of injection machine barrel.
Cold Runner Mould
Compared with the hot runner plastic molding, a cold runner mold does not require a special heating system for the runner system. It will be cooled with the product together and taken out after injection finishing, and then cut the runner, the cold runner mold is what we often call the traditional mold.
Switch Cover Injection Mold
The K-type thermocouple is a metal thermocouple with strong oxidation resistance, which can measure the medium temperature of 0~1300℃, suitable for continuous use in oxidizing and inert gases, the short-term use temperature is 1200°C, and the long-term use temperature is 1000°C, the relationship between thermoelectric potential and temperature is approximately linear, and it is currently the biggest thermocouple.
Transparent PC Injection Mold
Type-J thermocouple, the positive electrode of this thermocouple is pure iron, and the negative electrode is constant (copper-nickel alloy).
Common Hot Runner Temperature Sensing Wires Types And Characteristics
However, the basic principle is to use the corresponding relationship of a certain material to temperature changes, and a closed-loop is formed by two different component material conductors, when there is a temperature gradient at both ends, at this time, there is the electromotive force-term electromotive force between the two ends, which is called "Seebeck effect". After the electric potential signal is amplified by the amplifying circuit, it is converted into an AD signal and displayed by LED or pointer, thermocouple is one of the commonly used temperature detection elements in the industry.
If you want to know more types of runners in injection moulding, please visit our website.
As a custom plastic molding company, we can offer kinds of plastic injection moldingparts for sale, anything you need, please contact us.
Send product request
Other supplier products
 |
Automotive Mold | Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold... |
 |
Automotive Window Frame Mould | Car Window Mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product qua... |
 |
Gas & Water Assisted Injection Mold | Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injecti... |
 |
Multi Cavity Mold | Multi Cavity Mold The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling... |
 |
2K Mold | The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second colo... |
Same products
 |
For Mercedes-Benz-C-206 Modified Bumper Mould | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Taizhou Huangyan Chenpeng Mold Co., Ltd. is a professionalwholesale Mercedes-Benz-C-206 Modified ... |
 |
Front Bumper Lower Lip Mould For 2021 Honda CRV | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Introducing the for 2021 Honda CRV Front Bumper Lower Lip Mould: Elevate Your Driving Experienc... |
 |
Bottle cap mold | Seller: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds （）within 64 cavities. The hot runner or ... |
 |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... |
 |
Double Color Mold For Car Head Lighting Two-Shot Mold | Seller: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... |
