Cold Runner & Hot Runner Plastic Mold
Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner mould thermocouple has two types: standard type J and type K.
Hot Runner and Cold Runner Types
Multi Cavities Hot Runner Plastic Injection Mold
The hot runner will keep the plastic material in liquid in runner and injection gate, the temperature in injection machine barrel and runner are very high which can keep the material in liquid, due to there is heating system surrounded, it will only need to heat the hot runner to request temperature before production, and the hot runner is like the extension of injection machine barrel.
Cold Runner Mould
Compared with the hot runner mold, a cold runner injection molding mold does not require a special heating system for the runner system. It will be cooled with the product together and taken out after injection finishing, and then cut the runner, the cold runner mold is what we often call the traditional mold.
Switch Cover Injection Mold
The K-type thermocouple is a metal thermocouple with strong oxidation resistance, which can measure the medium temperature of 0~1300℃, suitable for continuous use in oxidizing and inert gases, the short-term use temperature is 1200°C, and the long-term use temperature is 1000°C, the relationship between thermoelectric potential and temperature is approximately linear, and it is currently the biggest thermocouple.
Transparent PC Injection Mold
Type-J thermocouple, the positive electrode of this thermocouple is pure iron, and the negative electrode is constant (copper-nickel alloy).
Common Hot Runner Temperature Sensing Wires Types And Characteristics
However, the basic principle is to use the corresponding relationship of a certain material to temperature changes, and a closed-loop is formed by two different component material conductors, when there is a temperature gradient at both ends, at this time, there is the electromotive force-term electromotive force between the two ends, which is called "Seebeck effect". After the electric potential signal is amplified by the amplifying circuit, it is converted into an AD signal and displayed by LED or pointer, thermocouple is one of the commonly used temperature detection elements in the industry.
If you want to know more different types of runner in mould, please visit our website.
USM is the world's leading custom injection mould manufacturer. We have always pushed developments forward and set benchmarks in Automotive, High precision, and 2K molding, and other industrial parts.
Other supplier products
|
|
Medical Plastic Mold |
Medical Plastic Moulding
Product material: PP material in medical-grade
Mold steel: S136 HRC 52-54
Mold life: 1 million
Hot runner brand:... |
|
|
Auto Parts Mould |
Injection Moulding Automotive Partsfeatures:
There are many undercuts on product inside and outside, and the undercut area is big too, the... |
|
|
Automotive Water Intake Manifold Mould |
AutomotiveWater Inlet Manifold
Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not requ... |
|
|
Gas & Water Assisted Injection Mold |
Gas & Water assisted injection molding
Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injecti... |
|
|
32 Cavity Mold |
32 Cavity Mold
In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the s... |
All supplier products
Same products
