Tobee® 12/10F-M Slurry Pump
Tobee® 12/10F-M Slurry Pumpis a proven horizontal end suction centrifugal slurry pump that will reliably and economically handle abrasive and corrosive medium duty services, The 12/10F-Mmedium slurry pumpsare of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistantmetal casting linersandImpellers, which are all interchangeable within a common casting assembly.
Design Features:
√ Wear is reduced and maintenance simplified by the use of a one-piece volute liner with no radial split at the cutwater
√ Front and back liners are adjustable while the pump is running to maintain efficiency and minimize wear; also reduces expeller clearance maintaining shaft seal performance
√ Internal liners can be fully worn as the cast iron split outer casing provides structural integrity and high operating pressure capability
√ Safe closed valve operation is assured by the pressure relief device fitted as standard on all models
√ An easily removable hardened steel or ceramic coated steel shaft sleeve with o-ring seals at both ends protects the shaft from abrasive or corrosive contaminants
√ Reduced and simplified inventory is assured with a minimum number of wearing parts
√ Reduced seal pressure and internal recirculation is achieved by the pressure molded deep sealing vanes on the front and back of the impellers
√ Extended bearing life is assisted by large diameter flingers and static seals to prevent ingress of liquids while operating and while stopped
√ Grease relief holes prevent bearing overheating due to over greasing
√ The best material for each application can be chosen from the wide range of erosion and corrosion resistant materials, enabling wear life optimization of each component
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
Send product request
Other supplier products
 |
Tobee® 3x2C-AH Slurry Pump | Tobee® 3/2C-AH Slurry Pumpis a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump off... |
 |
Tobee® 20/18TU-AHR Rubber Slurry Pump | Tobee® 20/18TU-AHR Rubber Lined Slurry Pumpfeatures a split-casing design with molded, replaceable rubber liners. The molded liner may be speci... |
 |
Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55 | Tobee® 8/6E-AHR Rubber lined slurry pumps wet end parts,Cover Plate Liner F6018R55, Impeller F6147R55,Frame Plate Liner F6036R55, Throat Bush F... |
 |
Tobee® 6/4D-AH Slurry Pump Parts Labyrinth Locknut D061 | Tobee®Slurry Pumpcan be usedfor6x4DE-AH Slurry Pumps, the basic part number is 061, its function is to fasten the labyrinth of drive end. And t... |
 |
Tobee® 6x4E-AH Slurry Pump | Tobee® 6x4E-AH Slurry Pumpis designed for continuous conveying highly abrasive and high-hardness, high-concentration, low-corrosion slurries co... |
Same products
 |
ZGD Screw Water Household Boosting Pump | Seller: Caifu Pump Industry Co., Ltd. | The ZGD Screw Water Household Boosting Pump is a versatile and reliable solution designed to enha... |
 |
V(WQ) One-Way Submersible Sewage Pump | Seller: Taizhou Yuansheng Aquacul Ture Machinery Co., Ltd. | TheV(WQ) One-Way Submersible Sewage Pumpis designed for wastewater and sewage transfer in residen... |
 |
Multi Purpose High Pressure Pump for Water Jet Cleaning | Seller: Tianjin Harvest High Pressure Pump Co., Ltd | 3D2F-S pump is our company's latest patented product with a maximum working pressure of 150... |
 |
Water Injection Pump for Tertiary Oil Recovery Applications | Seller: Tianjin Harvest High Pressure Pump Co., Ltd | This pump is suitable for pipeline cleaning ,workpipe cleaning,sand cleaning,rust removal,l... |
 |
Secondary Recovery High flow Pump | Seller: Tianjin Harvest High Pressure Pump Co., Ltd | 3D2C-S series high pressure plunger pump is an improved product of 3D2A-S series high press... |
