Self priming water pump
Chemical-Resistant self priming pump
Type:JKB-L series
Power:5-10HP
Frequency:50HZ/60HZ
Capacity:800~900 L/min
Head:30-36m
The corrosion-resistant self-priming pump is suitable for lifting and conveying of industrial sewage treatment, acid unloading, electroplating liquid circulation, supporting filters, chillers, etc.
Certification: ISO9001:2015,CE certification,Production&sales intellectual property management system certification;
Self priming water pump detailed description
·To prevent foreign material from entering the suction inlet, foot valve should be installed at the inlet.
·To prevent immediate back-flow, check valve should be installed at the outlet.
·Back-flow into the pump can cause the pump’s body damage as well as dry-running.
MODEL INDENTIFICATION
JKB-L-F -75 -07-2 -N -C -C -S-5
1 2 3 4 5 6 7 8 9 10
|
1 |
MODEL |
JKB-L |
|
2 |
MATERIAL |
F - FRPP P- PVDF |
|
3 |
IN/OUTLET |
75-3" |
|
4 |
POWER |
07-7.5HP, 10-10HP |
|
5 |
POLE |
2-2P 4-4P |
|
6 |
O-RING |
N-VBRE-EPDMV-VITON |
|
7 |
STATIONARY |
C-CERAMIC S-SIC |
|
8 |
ROTATIONAL RING |
C-CARBON S-SIC |
|
9 |
SPRING |
SUS316 |
|
12 |
FREQUENCY |
5-50HZ 6-60HZ |
Where to use the self priming pump?
- Industrial self-priming pumpis suitable for urban environmental protection, construction, fire protection, chemical, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment cooling, oil tanker unloading, etc.
Self priming pumpsare mounted above the liquid source generally at “ground level”, so less infrastructure is required to set them up. And because they are located at ground level, they are easier to access and much easier to maintain and repair. As there is no mechanical equipment in the wet well, there is no need to open wet well lids, and there is no need for hoists or cranes as in the case of submersible pumps, making them a much safer option for operators.
Send product request
Other supplier products
 |
Air operated diaphragm pump | Air operated diaphragm pump PumpBody:Plastic,Aluminum,Cast Iron and Stainless steel； Model:QBY4-10/15 Fluid Inlet&Outlet size:1/2”; 3/8... |
 |
High temperature resistant horizontal stainless steel centrifugal pump | SUS304/SUS316/SUS316L stainless steel centrifugal pump Type:JKA series Material:SUS304/SUS316/SUS316L; Power:0.375kw~40kw; Frequency:50HZ/60HZ Vol... |
 |
High temperature resistant diaphragm pump | Air operated diaphragm pump PumpBody:Plastic,Aluminum,Cast Iron and Stainless steel； Model:QBY4-50/65 Fluid Inlet&Outlet size: 2" ; 2½"... |
 |
Plastic magnetic drive centrifugal pump | Plastic Magnetic drive centrifugal pump-CQB-FJ series: Capacity:1m3/h-200m3/hHead:5m-80m Applicable medium: Any concentration of acid, alkali, sal... |
 |
Single-stage single-suction fluoroplastic alloy chemical centrifugal pump | Single-stage single-suction fluoroplastic alloy chemical centrifugal pump Model:IHF Powe:1.5kw~90kw; Material:PTFE Model Indentification: IHF 50 3... |
Same products
 |
danfoss hydraulic motor supplier | Seller: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | danfoss hydraulic motor supplier Danfoss Hydraulic Motor – Overview A Danfoss hydra... |
 |
rexroth hydraulic motor | Seller: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | rexroth hydraulic motor Rexroth Hydraulic Motor – Overview A Rexroth hydraulic moto... |
 |
parker hydraulic pump supplier | Seller: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | parker hydraulic pump supplier Parker Hydraulic Pump Supplier – Simple Introduction ... |
 |
eaton hydraulic pump remanufactured manufacturer | Seller: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | eaton hydraulic pump remanufactured manufacturer Remanufactured Eaton Hydraulic Pumps &ndash... |
 |
danfoss hydraulic pump supplier | Seller: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | danfoss hydraulic pump supplier Danfoss Hydraulic Pump Supplier – Simple Overview A... |
