API 6D Stainless Steel Three Way Ball Valve
The three way ball valves have especially been designed to permit a 90°connection between two pipes of same bore. The special construction of the valve is such as to allow a smooth flow of fluids with minimum pressure drop and permit the pig to pass through the pipe without any interruption of the seal between the pig and the pipe.
The valve is recommended for use in pipelines, where pigs or scrapers are to be diverted for a quick distribution of the fluid without pollution and with minimum pressure drop.
The seal on the stainless steel ball is obtained by means of preloaded Teflon inserted rings.
Pressure: 150LB-1500LB
Size:1/2 inch -32 inch
Temperature of medium: -40--180℃
Medium: Water, Oil, Steam, Nitric Acid, Acetate etc.
Material:SS316, SS304, WCB etc
Structures: L type and T type
Bore: Full bore, Reduced bore,
Operation: lever, gear, pneumatic, electric
Standard:
1, Design: ASME B16.34/API 6D
2, Face to Face: As per Manufacturer Standard
3, End to End: ASME B16.10
4, End Flange: ASME B16.5
5, BW End: ASME B16.25
6, Test: API 598
7, Fire Safe Test: API 607/API 6FA
8, Special NACE MR-01-75
Send product request
Other supplier products
API 6D Stainless Steel Three Way Ball Valve | The three way ball valves have especially been designed to permit a 90°connection between two pipes of same bore. The special construction of... | |
Forged Steel Y-Pattern Globe Valve | Description: Y-Pattern Globe valves are available in three bonnet designs. 1) Bolted Bonnet, with male-female joint, spiral wound gasket, made in F... | |
ANSI Cast Steel Swing Check Valve | Description: 1)Design and manufacture of product according to American state standard ANSI B16.34, American petroleum institute standard API6D. 2)S... | |
Three Way Electric Control Valve | Three Way Electric Control Valve Detailed Specification: 1) The apparatus is equipped with electrical operator and could realize two directions no ... | |
Carbon Steel Trunnion Mounted Ball Valve | Features 1. Two or Three-piece body design2. Double block and bleed or automatic pressure release in body chamber3. Trunnion supported design red... |
Same products
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... | |
Class 1500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |