4 core power cable,rubber cable flexible control cable for welding
Low Voltage Cable 0.6/1kv Electric Cable PVC XLPE Insulated
1. Operating Characteristics
Rated voltage: 0.6/1(1.2)kV
Max. Permissible continuous operating temperature of conductor: 70 ° C
Max. Temperature of conductor during short-circuit (5s max. Duration) shall not exceed:
Nominal cross section of conductor ≤ 300mm2: 160 ° C
Nominal cross section of conductor >300mm2: 140 ° C
The ambient temperature under installation should not be lower than: 0 ° C
The bending radius of cable is recommended as following:
For single core cable: Not less than 15 times of the diameter of cable
For multi-core cable: Not less than 12 times of the diameter of cable
When the armored single core cable used for Alternative Current(AC) system, the armoring material should be non-magnetic.
2. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.
Other supplier products
|
|
JIS ASTM GOST BS flange welding wafer butterfly valve |
Tebon Valve could supply all kinds of butterfly valve with penumatic actuator and electric actuator.Manual operation, worm turbine drive, gas drive... |
|
|
fixed floating ball valve/full welding three way ball valve |
Tebon Valve could supply all kinds of ball valve with penumatic actuator and electric actuator.Manual operation, worm turbine drive, gas drive, ele... |
|
|
Rubber metal impeller slurry pump,mineral processing slurry pump |
Tebon slurry pumps,water pumps are widely used for mineral processing plant,including hundreds models for differents.They are design for long life,... |
|
|
stainless steel filter strainer,flanged end Y type trainer filter |
Description: Y-Type & U-type strainer is usually used with oval gear meter filtering the impurities in the pipe of the liquid transportation. I... |
|
|
316 stainless steel,butt weld tee pipe fitting |
SS304 316 stainless steel tee Size: DN10-DN200, 1/2"-8" or as required Standards:DIN,3A,SMS,ISO,IDF, RJT Material:,AISI304,AISI316L Finish: Mirror... |
All supplier products
Same products
