API brass/steel angle valve china manufacturer,cast iron angle valve flange type
Specifications
1. Brass body & cartridge(Cu57Pb3), zinc alloy handle, polishing, chrome plated.
2. CE, ISO9000.
Technical Requirement:
1. Before assembling, all parts should be clean, no oil or grease. Remove all burrs and sharp edges.
2. Before connecting, body cap male thread should be coated with sealing glue.
3. Handle turn or close freely.
4. After assembling, test by water at pressure no less than 0.8Mpa, no leakage.
Other details:
Handle: ABS with chrome coated
Cartridge: Brass quick open
O-ring: NBR
Nut: Brass with polishing&chrome
Ring: Brass
Body: Forged brass with Polishing&Chrome
Decoration disc: Stainless steel
Connection: Male
Size: 1/2"x3/8" ; 1/2"x1/2"
Remark:
Brass Grade: 57-3 ( Cu>57%, Pb<3%)
No obvious spots, scratches on surface.
Other supplier products
|
|
Stainless steel pneumatic cut off Valve,flange connection pneumatic control valve |
Caliber: DN200-1400 Nominal pressure: 0.25,0.6 MPa Applicable temperature: ≤ 250 ℃ Fast opening time :1.5-3 seconds Applicablemedium: gas and to... |
|
|
API ANSI Angle stop valve,3 way bathroom angle stop valve |
1 In the opening and closing process, because the valve flap and valve sealing surface friction than the gate is small, and therefore wear. 2 Turn ... |
|
|
API brass/steel angle valve china manufacturer,cast iron angle valve flange type |
Specifications 1. Brass body & cartridge(Cu57Pb3), zinc alloy handle, polishing, chrome plated. 2. CE, ISO9000. Technical Requirement: 1. Befor... |
|
|
Carbon Steel Elbow,Seamless Butt Welding Elbow,304 Stainless Elbow fitting |
Pipe fittings are parts which connect to pipe. Depending on the connection method they can be divided into socket fittings, threaded fittings, pipe... |
|
|
JIS ASTM GOST BS flange welding wafer butterfly valve |
Tebon Valve could supply all kinds of butterfly valve with penumatic actuator and electric actuator.Manual operation, worm turbine drive, gas drive... |
All supplier products
Same products
