Concentric Butterfly Valve
The concentric butterfly valve is characterized by the stem center, disc center and body center in the same position. Such structures are simple to make. The common wafer rubber lined butterfly valves are of this type. The drawback is that the disc and seat are always in the extrusion, scraping state, large resistance, fast wear. In order to overcome squeeze, scratch, seal performance, seat basically uses rubber or polytetrafluoroethylene elastomeric material, but also because seal material is used on the limit of temperature, this is why traditionally people think the butterfly valve does not bear high-temperature reason.
Therefore, the central butterfly valve is basically under the condition of temperature below 60 degrees and pressure below 25 kilograms. The simple structure of the centric butterfly valve focuses on the sealing of the rubber seat and the sealing between the rubber seat and the stem. Every middle line butterfly valve delivered by ZhengFeng will not give up the strength and pressure test process of each one because of its simplicity, thus ensuring the perfection of this kind of valve. Due to its simple structure, ZhengFeng also pays special attention to its appearance. The ductile iron butterfly valve adopts advanced casting process of inner and outer coating sand, which ensures that every casting mark on the valve body and even the handwriting on the small 2-inch valve body is clearly visible.Awwa c504 butterfly valve manufacturersin China are abundant on the pursuit of higher quality, on the one hand, is to let the customer can get free maintenance rate in terms of use of convenient and simple relieved, on the one hand is to hope that in the long term is abundant brand can be set up in the field of global water butterfly valves, so we would like the attitude of benchmarking to establish the brand, to make our products.
Other supplier products
|
|
3 Inch Gate Valve |
Description of 3 Inch Gate Valve:
ZECO 3 inch gate valve is mainly used for fully open or fully closed switching valves. They are usually not used ... |
|
|
Bronze Adjustable Dynamic Flow Balancing Valve |
ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
|
|
Knife Gate Valve |
Features of sewer knife gate valve
Full bore design for high media throughput capacity;
U-shaped gasket with good sealing effect;
Gate pla... |
|
|
30 Inch Valve |
The 30 inch is mainly used for a small number of performance valves to regulate flow, for filtering, and for butterfly and gate valves to be used a... |
|
|
3 Inch Butterfly Valve |
Description of 3 Inch Butterfly Valve:
ZECO 3 inch flanged butterfly valveis a small diameter butterfly valve, usually manually operated, and the c... |
All supplier products
Same products
|
|
Class 300 Valve |
Seller: GangYe Group Co.,Ltd. |
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
|
|
Class 3000 Industrial Valve |
Seller: GangYe Group Co.,Ltd. |
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
|
|
Class 2500 Industrial Valve |
Seller: GangYe Group Co.,Ltd. |
Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
|
|
Class 150 Valve |
Seller: GangYe Group Co.,Ltd. |
globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
|
|
Class 1500 Industrial Valve |
Seller: GangYe Group Co.,Ltd. |
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |
