Float Control Valve
Basic InformationThisthe level of the water in the water tower or sink.Features1. Stable and reliable work, large flow;2. Disc fast open and slowly closed, no water hammer impact;3. Good sealing effect and long service life;4. Install at any location along with the height of the water tank and the working space.PrincipleWhen the pipe supplies water from the inlet end, because the needlevalve, ball valve and float ball valve are normally open, water enters the water tank through the micro-filter, needle valve, control room, ball valve and float ball valve. At this time, there is no pressure in the control room; When the water level of the water tower rises to the set height, the ball float closes the ballfloat valve, controls the indoor water pressure rise, pushes the main valve to close and the water supply to stop. When the water level drops, the float valve reopens, the water pressure in the control room drops, and the main valve opens again to continue the water supply, keeping the setting height of the liquid level.
Other supplier products
|
|
Wafer Check Valve |
What is a Wafer Check Valve?
Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possi... |
|
|
Motorized Butterfly Valve |
As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan... |
|
|
Through Conduit Gate Valve |
Description of Through Conduit Gate Valve:
ZECO through conduit gate valveis a straight pipe valve.The design is ideal to minimize pressure drop an... |
|
|
Pump Control Valve |
Festures of pump flow control valve
Slow closing effectively prevents water hammer.
Stop pump stable and save energy
Full port, small flui... |
|
|
Floating Ball Valve |
Description of Floating Ball Valve:
ZECO floating ball valve chinahas two seats supporting the ball Under medium pressure, the ball can be pressed... |
All supplier products
Same products
