Wafer Dual Plate Check Valve

• 

Description of Wafer Dual Plate Check Valve:

The structure of ZECO wafer dual plate check valve is that the disc is along the pin at the center position of body to swing, short structure dimensions, small volume. Light in weight, good process performance, quickly open and close. Small water-hammer pressure, shorter travel, small closed-impact pressure, In the horizontal or vertical pipe can be used, even easy installation. The internal design of ZECO wafer dual plate check valve minimizes the water hammer problem, it can also significantly improve the flow efficiency which is important for large size piping system. For larger O.D. piping systems, 36” and above, the dual-plate design is recommended and preferred. The wafer dual plate check valve design should also be considered for smaller O.D. piping systems where swing check valves have demonstrated flow related problems. ZECO dual plate check valve have a short face to face dimension and the weight is only about 25% that of a comparable size swing check valve.

Features of Wafer Dual Plate Check Valve:

2. ()wafer dual plate check valve ensure valve closure as quick as possible, and reduces water hammer, so as to extend valve life and improve system performance;

Other supplier products

	Double Offset Butterfly Valve	Description of Double Offset Butterfly Valve: ZECO is further improved on the basis of single eccentric butterfly valve. The stem axis of single ec...
	Butterfly Valve	Butterfly valve is operated through the 90 degree rotation of the butterfly plate and can be used in the pipeline for regulating and stopping media...
	6 Inch Ball Valve	Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturerin China.Since its establishment in 1991, it has been pro...
	Electric Ball Valve	Description of Electric Ball Valve: ZECOelectric ball valveis named after the combination of electric actuator and ball valve. It is usually used i...
	Triple Offset Butterfly Valve	Description of Triple Offset Butterfly Valve: ZECO triple offset butterfly valve adopts three-eccentric structure, which increases angle eccentrici...

Same products

	Class 300 Valve	Seller: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Seller: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...