China Gate Valve
What isGate valves
are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choosethe right type of valveto avoid high replacement costs.
Gate valvesare used to shut off the flow of liquids rather than for flow regulation. When fully open,the typical gate valvehas no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, apartially open gate can vibrate from the fluid flow
Gate valvesare mostly used withlarger pipe diameters (from 2" to the largest pipelines)since they are less complex to construct thanother types of valvesin large sizes.
Main gate valve parts of a gate valveare:body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.
There are three ways to classify the gate valve.
Types of Disk
Solid taper wedge
Flexible wedge
Split wedge or Parallel disks Valve
Types of Body Bonnet Joint
Screwed Bonnet
Bolted-Bonnet
Welded-Bonnet
Pressure-Seal Bonnet
Types of Stem movement
Rising Stem or OS & Y Type (Outside Stem and Screw Type)
Non-rising Stem type
Gate valvesare used in almost all fluid services such asair, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.
Some special gate valve is used in slurry and powder product also such as knife gate valve
Send product request
Other supplier products
 |
Metal Seated Gate Valve | Features DIN3352 F4 Metal Seat The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excell... |
 |
DIN3202 F1 Y Strainer | Product Description Standard of Designstandard DIN3202 F1 Flange drilling standard EN1092-2 PN10,PN16 Facetofacestandard EN558... |
 |
Flexible rubber disc check valve | Product Descriptionof Technical Parametersof Nominaldiameter(mm) 50～400 50～400 Nominalpressure(Mpa) Testingpressure Shell(Mp... |
 |
DIN Resilient Seated Gate Valve | Features DIN3352-F4 , DN40-DN1200 The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the exce... |
 |
Socket End Resilient Seated Gate Valve | Features DIN3352 ， 63mm-315mm The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellen... |
Same products
 |
Aluminum Gas Valve | Seller: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,... |
 |
Yoyik supply Fan slider S4GA8814 for turbine generator | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | Yoyik supply Fan slider S4GA8814 for turbine generator Is a major production of Dongfang Yoyik. D... |
 |
API 6A FC Slab Gate Valve | Seller: China JSC Valve Manufacturer Group Co., Ltd. | FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a... |
 |
API 599 Lubricated Plug Valve | Seller: China JSC Valve Manufacturer Group Co., Ltd. | Full Bore Metal Seated Lubricated Plug ValveProduct description: Pressure balance, lubricated, fu... |
 |
Pneumatic Actuated Butterfly Valve | Seller: China JSC Valve Manufacturer Group Co., Ltd. | Pneumatic Actuated High Performance Butterfly ValveValve description:High performance butterfly v... |
