.

AAK relief valve must be debugged for 3 times without vibration and noise. Singapore customer placed an order immediately after comparison

AAK relief valve inner hole grinding (internal grinding) has to be debugged for at least 3 times, and large-scale production can be arranged only after seamless connection with valve core, which can avoid vibration and suppress noise. We are proud to say that at present, nearly 90% of manufacturers can not do so.

The relief valves from many manufacturers has a same problem, after being used for some time, there will be varying degrees of vibration and noise. This is due to the neglect of the control of the accuracy of the inner hole, resulting in the roughness of the inner hole. Therefore, in the process of use, after being adjusted several times, the valve core will be stuck, causing the pressure fluctuation of the relief valve, resulting in vibration and noise, which directly affects the normal use of the relief valve.

Some time ago, a Singaporean customer contacted us through the website, and a batch of relief valves was complained by consumers due to quality problems. There is no problem in the test before delivery, but there is noise in the hands of consumers. Nearly 30% of the products in the same batch have this problem.

Since we didn't see the relief valves, we couldn't analyze the specific reasons. We suggested that he send us several samples for detailed analysis. Seven days later, I received the relief valves from him. The surface gloss of these samples is very good. The internal parameter test shows that the accuracy deviation of the inner hole is very large (rough). After adjusting the flow rate for many times, it is easy for the valve core to be stuck, which is the key reason for vibration and noise.

We ed him the test result, together with our product parameters. After receiving it, the customer immediately called back for consultation. I told him that in order to save costs and pursue production efficiency, many manufacturers ignored the control of inner hole precision in the production process. As long as consumers use it several times, the valve core will be stuck, resulting in the main valve not opening up or the main valve closing without pressure relief, which will cause the pressure fluctuation of the relief valve and cause vibration and noise. At the same time, the customer compared our relief valve parameters and was very shocked, so he requested us to send some samples at their cost to them for comparison.

Half a month after sending the samples, we received an order from him. After the comparison test, the customer confirmed that there was no noise problem in the AAK relief valves, and the parameters were acceptable to them, so they decided to place an order with AAK.

In order to avoid the vibration and noise problems caused by the stuck valve core, AAK has already controlled the precision during the punching and grinding of the inner hole in the early stage, and each batch of relief valve must be debugged for 3 times to ensure the seamless connection with the valve core. After confirming that the processing accuracy is qualified, large-scale production can be arranged. In fact, only every process is not careless, a good relief valve can be made. The principle is simple, but often 90% of the manufacturers do not take it seriously.

Vibration and noise? You will not have this problem if using AAK flow valve. It is also not expensive because it is easy to use - great quality without trouble.



Send product request

To: AAK INDUSTRY CO., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company
AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company Caleb is the purchasing manager of...
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000 AAK relief valve strictly controls the roundness error of oil sealing surface within 0.005 - 0.01mm, so as to avoid unbalanced force of pressure re...
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and there is no oil leakage, a customer in Netherlands placed two orders
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and there is no oil leakage, a customer in Netherlands placed two orders Jensen is the purchasing manager of a hydraulic valve company in the Netherlands. Recently, he has received continuous complaints. The oil seal eff...
AAK took over to solve the problem of hydraulic valve not matching drawing, become the preferred supplier of an American customer
AAK took over to solve the problem of hydraulic valve not matching drawing, become the preferred supplier of an American customer AAK took over to solve the problem of hydraulic valve not matching drawing, become the preferred supplier of an American customer Smith is the pur...
AAK hydraulic valve quality higher than 90% of the peers, successfully salvage the client's foreign trade customers
AAK hydraulic valve quality higher than 90% of the peers, successfully salvage the client's foreign trade customers The high pressure throttle hydraulic valve produced by AAK, the quality is higher than 90% of the peers, and help a foreign trade company in Guang...
All supplier products

Same products

3pc Ball Valve
3pc Ball Valve Seller: Shijiazhuang Retool Stainless Steel Products Co., Ltd. 3pc ball valves It has artistic appearance and good function. With complete quality control devic...
Valve Body
Valve Body Seller: Shijiazhuang Retool Stainless Steel Products Co., Ltd. Body Bonnet Product description:Investment casting and machining parts from Retool company. Preci...
Eccentric Butterfly Valve
Eccentric Butterfly Valve Seller: Tianjin KXC Metal Products Co., Ltd We  in DN200-2800 designed with durability in focus. The tilted and firmly secured disc, the opt...
Double Flange Butterfly Valve
Double Flange Butterfly Valve Seller: Tianjin KXC Metal Products Co., Ltd Low head loss. Vulcanized seat that avoids the contact between fluid and cast iron, avoiding co...
Lug Type Butterfly Valve
Lug Type Butterfly Valve Seller: Tianjin KXC Metal Products Co., Ltd consist of a disk which forms a seal against an elastomer or metallic seal. The disc rotates ins...