4 Inch Gate Valve
Description of 4 Inch Gate Valve:
ZECO 4 inch 4 inch flanged gate valveis one of the most commonly used calibers. Gate valve in the line just switch effect, looks small, really small gate to pipeline protection as very important, although the gate valve switch is a long time, but the gate valve torque needed to light, in the case of an emergency, if only one person online, if go to close a 4 inch ball valve, may take the human is very big, if the manufacturing process is a little omission cause excessive torque, also likely won't open, but the gate by hand wheel operation, turn the handwheel to drive the stem promoted, this itself is a process of from, open is very light.
Features of 4 Inch Gate Valve:
Material of 4 Inch Gate Valve:
No |
Part |
Material |
1 |
Body |
ASTM A216 WCB |
2 |
Seat Ring |
ASTM A182 F316 + STL |
3 |
Wedge |
ASTM A351 CF8M + STL |
4 |
Stem |
ASTM A276 316 |
5 |
Bonnet Gasket |
Graphite + SS316 |
6 |
Bonnet Bolt |
ASTM A193 B7 |
7 |
Bonnet Nut |
ASTM A194 2H |
8 |
Bonnet |
ASTM A216 WCB |
9 |
Backseat |
ASTM A182 F316 |
10 |
Stem Packing |
Reinforced Graphite |
11 |
Handwheel |
KTH330-08 |
As a China valve supplier, we will attempt to produce more high quality products for customers.
As a valve company, ZECO have long-term cooperation with China National Chemical Equipment Corporation (CNCE) and China Petroleum; Chemical Engineering Survey and Design Association(CPCESDA).As recognize the growing need, developed our own laboratory for research; development for international standard valve design innovation and vertification, which includes PT, MT, UT, FE test. ZECO is the humble and united team, to be more diligent and progressive to show the itegrity to our clients.
Send product request
Other supplier products
Pressure Relief Valve | This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline ex... | |
Wafer Check Valve | What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possibl... | |
Altitude Control Valve | ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y... | |
Backflow Preventers(Low Pressure) | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... | |
2.5 Inch Valve 1025 | Most of the 2.5 inch butterfly valveused in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expen... |
Same products
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... | |
Class 1500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |