.

Dynamic Balancing Valve

Festures of Dynamic Balancing Valve

No external energy is required for automatic flow regulation;

Automatically adjust equipment or pipeline flow to meet the required design flow;

No need for balance debugging before the system runs;

Keep pipe flow constant.

Dynamic Balancing Valve Working Principle

When the pressure difference control range is above, the butterfly valvetank is completely compressed, and the cross flow area is only the minimum design channel, and the flow rate changes with the pressure difference. When the pressure difference is within the control range, the valve tank moves with the pressure difference, thus changing the flow area and keeping the flow at the set value. Under the pressure differential control range, the valve is fully extended to reveal the maximum over current area, and the flow rate changes with the pressure difference.

Flow Design Balancing ValvesInstallation and Commissioning

This valve is mainly used for flow regulation and hydraulic balance. It can not be used as a shutoff valve because there is a certain amount of leakage when it is closed. For specific use, please consult Zeco Valve Group.

Dynamic Balancing Valve Material and Standard

Size Range: 1/2"~2"

Pressure Rating: 10bar ~ 16bar

Face to Face Dimensions:EN 558-1, ASME B 16.10

Flange End Dimension: BS 21

Inspection and Test: ISO 5208 / EN 12226-2

Part

Material

Standard

Body

CuZn39Pb1 / C37000

EN12167/ASTM B135

Bonnet

CuZn39Pb1 / C37000

EN12167/ASTM B135

Trim

CuZn39Pb1 / C37000

EN12167/ASTM B135

Measuring Port

CuZn39Pb1 / C37000

EN12167/ASTM B135

O-Ring

EPDM / NBR

ISO 4633

Handwheel

Nylon

ISO 4633

For materials options not listed, consult factory.

Zeco manufactures valves in more than 50 different alloys.

As one of gate valve manufacturers in China, we will provide more high quality for sale, if you have needs, contact us.



Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

3 Inch Gate Valve
3 Inch Gate Valve Description of 3 Inch Gate Valve: ZECO 3 inch stainless steel gate valveand 2 flanged gate valveis mainly used for fully open or fully closed swit...
6 Inch Ball Valve
6 Inch Ball Valve Description of 6 Inch Ball Valve:ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been pro...
Resilient Gate Valve for Underground
Resilient Gate Valve for Underground Basic informationThis underground gate valveis used as a two-way closed circuit device.Features1. No need for sluice Wells, which reduces the amoun...
Double Orifice Air Release Valve
Double Orifice Air Release Valve Basic informationThis is a pipeline will be matched equipment, apply to the temperature does not exceed 100 water, hot water pipe on the pipe from ...
Triple Offset Butterfly Valve
Triple Offset Butterfly Valve Description of Triple Offset Butterfly Valve: ZECO triple offset butterfly valve adopts three-eccentric structure, which increases angle eccentrici...
All supplier products

Same products

Клапан
Клапан Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd Клапан
Class 300 Valve
Class 300 Valve Seller: GangYe Group Co.,Ltd. Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
Class 3000 Industrial Valve
Class 3000 Industrial Valve Seller: GangYe Group Co.,Ltd. Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
Class 2500 Industrial Valve
Class 2500 Industrial Valve Seller: GangYe Group Co.,Ltd. Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
Class 150 Valve
Class 150 Valve Seller: GangYe Group Co.,Ltd. globe valve class 150is a pressure rating designation defined by standards organizations, such as...