GLOBE VALVES
MstnLand is reliable globe valve factory. We provide high-quality industrial globe valve products, including API globe valve, DIN globe valve, ANSI bellow seal globe valve, Angle globe valve, Y type globe valve, and Pressure seal globe valve etc. Our globe valve factory has the capability to manufacture various globe valves types you need.
The globe valve only allows one-way medium flow and it relies on valve rod pressure to make both the sealing surface of valve disc and the valve seat tightly fit and then prevent medium flow. As an experienced and tested globe valve manufacturer, Mstnland offers globe valves that are featured by elbow saving and easy operation and can be installed in the bend of the pipeline system.
Types Of Globe Valve For Sale
Cast Steel Globe Valves
Types of Globe Valve
As a cast steel globe valves manufacturer, Mstnland provides different types of high-quality cast steel globe valves for customers to choose from.
Forged Steel Globe Valves
As a globe valves manufacturer, Mstnland provides different types of high-quality forged steel globe valves for customers to choose from.
Stainless Steel Globe Valves
As a superior stainless steel globe valves manufacturer, Mstnland provides different types of high-quality stainless steel globe valves for customers to choose from.
Brass Globe Valves
As a superior brass globe valve manufacturer, Mstnland provides different types of high-quality brass globe valves for customers to choose from.
Globe Valve Operation
Not only should we learn to install and maintain the globe valve, but also we must be able to operate it.
When opening and closing the globe valve, the force should be steady without impact. When the globe valve is fully opened, the handwheel should be turned upside down to tighten the threads to avoid loosening and damage. When the pipeline is first used, there is a lot of internal dirt. You can open the globe valve slightly, use the high-speed flow of the medium to wash it away, and then close it gently (not fast or violently to prevent residual impurities from trapping the sealing surface). Turn it on again, repeat this many times, flush out the dirt, and then put it into normal work.
If the globe valve is opening for a long time, there may be dirt on the sealing surface. When it is closed, use the above method to flush it, and then formally close it tightly. If the handwheel and handle are damaged or lost, they should be provided immediately, and can not be replaced with a flexible wrench, so as to avoid damage to the valve stem and failure of opening and closing, which may cause accidents in production.
Some medium cools down after the globe valve is closed, causing the valve to shrink. The operator should close it again at an appropriate time so that there are no crevices on the sealing surface. Otherwise, the medium will flow through the crevices at high speed and it will easily erode the seal.
During operation, if the operation is found to be too laborious, the reason should be analyzed. If the packing is too tight, it can be properly loosened. If the valve stem is skewed, personnel should be notified to repair it. In some globe valves, when closed, the closing part is heated and expanded, which makes it difficult to open; if it must be opened at this time, the valve cover can be loosened half a turn to one turn to eliminate the stress on the valve stem, and then move the handwheel.
If you want to know more types of water ball valve, please visit our website.
Send product request
Other supplier products
 |
BALANCING VALVE WORKING PRINCIPLE | Balancing valve working principleis about how balance valve works. Balance valve is a dynamic and static balancing valve under hydraulic conditions... |
 |
HIGH TEMPERATURE AND HIGH PRESSURE NEEDLE VALVE | MstnLand's series of High temperature and high pressure needle Valve is mainly used in high temperature environment of fluid pressure regulation, p... |
 |
CAST IRON FILTER | CAST IRON FILTER Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of press... |
 |
BRASS CHECK VALVES | BRASS INTERNAL THREAD SWING CHECK VALVE As a globe valve manufacturer, MstnLand's series of brass internal thread swing brass inline check valveuse... |
 |
SWING CHECK VALVES | A swing check valve is a simple device designed for the one-way flow of a liquid or gas. It has a disc that swings on a hinge, opening to allow flu... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
