GKSA-Series Integrated Electric Actuator

GKSA series electric actuator is integrated linear actuator, it uses eletronic component instead of mechanical components with modular structure. Frequency conversion integrated actuatorsbuilt-in frequency converter, so as to achieve reasonable use of energy.

Standard Design of GKSA-Series Integrated Electric Actuator

Standard actuators: short-time duty S2-15 min acc. to DIN EN 60034

Modulating actuators: intermittent duty S4 / S5 acc. to DIN EN 60034: min. 25% duty cycle, 1200 c/h for all tripping torque and output speed combinations in the Temperature range from -20°C to +60°C

Protection class IP67 acc. to DIN EN 60529 (IP68 on request)

Motor insulation class F

Electronic motor protection, automatic phase sequence correction

Start-up current lower than rated current

Line voltage tolerance -10% / +15% in the chosen voltage range, frequency range from 40 to 70 Hz

Permissible ambient temperature: -20°C to +60°C (-4°F to +140°F), higher temperatures on request

Double sealed electric connection:(dust and water-protected when plug withdrawn)

Separate mounting of the electronics unit possible hand crank/wheel for emergency operation (disconnected during motor operation!)

"Non intrusive" after adjustment of the end positions of the valve (PROFITRON)

Different output speeds, adjustable for OPEN, CLOSE, Emergency OPEN and Emergency CLOSE (PROFITRON)

Travel dependant cut-off continuously adjustable 3 reference torque curves of the valve can be stored (PROFITRON)

Operator guidance via display in 9 languages (PROFITRON) external 24 V DC supply for electronics unit possible as standard

Running indication

Features of GKSA-Series Integrated Electric Actuator

Simplify structure,reasonable---use electronic components instead of mechanical components,adopt modular structure.

Protection grade:lowest level is IP67, meet the DIN EN 60529 standard.(Note: can provide IP68 protection grade when needed).

Seperate installation:when installation space is not enough, the temperature is too high, the vibration is excessive or the debug and test on-site is hard, then intelligent control unit and main part can be installed separately.

GEKO Valves & Controls, born in Germany, is a well-known professional valve manufacturer, we provide forged steel cryogenic globe valve, cryogenic globe valve, valve for saleand etc. For more information, please feel free to contact us!

Other supplier products

	GKS-300 Series Valve Limit Switches	Explosion Proof GKS-300 Series Limit Switch offers high-performance and stable product for high danger occasion. Aluminum or stainless body, polyes...
	GKV-212 Ball Valve, 1 Piece, Flanged Connection, With Lever Handle	GKV-212 One Piece Stainless Steel Ball Valve,Flanged Connection, With Lever Handle Blow-out Proof Stem/ Full Port ISO 5211 Mounting Device ...
	GEKO CRYOGENIC VALVES	Geko cryogenic needle valveare commonly designed for the applications at very low temperature, such as the storage or transportation of liquefied n...
	GKV-125L Ball Valve, 2 Piece, Threaded Connection, Full Port, With Lever Handle	Blow-out Proof Stem Working Pressure(Cwp): Dn8~Dn50 1000 Psi / Dn65~Dn80 800psi Temperature Range: -20 To 180℃ Highlights of the GKV-125L ...
	GKV-128 Ball Valve, 2 Piece, Threaded Connection, Full Port, With Lever Handle	Blow-out Proof Stem Working Pressure(Cwp): Dn8~Dn50 3000 Psi / 6000psi Temperature Range: -20 To 180℃ Highlights of the GKV-128 Full Flow ...

All supplier products

Same products

	Class 300 Valve	Seller: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Seller: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...