Why Close the Discharge Valve Before Starting the Centrifugal Pump?
Reasons for closing the discharge valve
The starting current can be reduced by closing the discharge control valve.
The current will be very high when any motor starts. When the pump is started with an open discharge valve, the discharge head will have greater resistance to the pump. Therefore, the motor must give the pump a larger starting torque, which means that the motor needs to draw more current.
If the discharge valve pump are closed when the pump is started, it means that there is no discharge head and minimum resistance to the pump, and therefore the output current is the smallest. Although the current is greater than the normal value when the motor starts, closing the discharge valve of the centrifugal pump can avoid additional load on the pump.
Situations when the discharge valve can be opened
The nab discharge valves can be opened when there is a check valve. If there is pressure on the discharge side of the centrifugal pump without a check valve when starting, the discharge valve should be closed. With a transparent plastic pipe, leakage can be easily found. It should be used with clear PVC fittings to perform well. It's good to work with clear PVC pipe manufacturer to solve problems together.
Risks of the unclosed discharge valve
Thinking from another aspect, if there are pressures at the discharge end of the pump, it may flow back into the pump before starting. And it will cause backward rotation, which can attract more current and cause damage to the pump. Therefore, it can be prevented by closing the discharge valve of the centrifugal pump when it starts.
If you want to know more about why discharge valve is closed in centrifugal pump, please visit our website.
As a china globe valve manufacturer, we can offer sorts of Globe Valvesfor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
Duplex Plug Valves | Duplex stainless steels are called “duplex” because they have a two-phase microstructure consisting of grains of ferritic and austeniti... |
 |
Check Valves | Check valve is a valve referred to the opening and closing parts for the circular disc and by its own weight and medium pressure to block the media... |
 |
Control Butterfly Valves | Control butterfly valves of Weidouli are designed and manufactured in strict accordance with the latest version of API 609 specification, meanwhile... |
 |
Globe Valves | A china manual gate valveis a linear motion valve and is primarily designed to stop, start and regulate flow. The disk of a Globe valve can be tota... |
 |
NAB C95800 Globe Valves | Aluminum-bronze valves are a suitable and far cheaper substitute to duplex, super duplex, and monel for many seawater applications, especially in l... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
