Pex Ball Valve
The half inch and 1 inch pex ball valveprovided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ball valve wear resistance is that the valve core when it is sealed is welded with alloy steel, and its sealing ring is also welded with alloy steel. In addition, ball valve for pex pipehas good sealing performance, and the reliability of the sealing performance of the China bronze ball valve is extremely high, because its sealing is manual running-in, and it can only be done when the pex ball valve core and the sealing ring completely match. The switch of pex ball valves for saleis light, and the bottom of its sealing ring has a spring between the valve core and the sealing ring. If you want to know more about the pex ball valve cost, please contact us!
Pex Ball Valve Details:
Ball valve rating: 400PSI
Designed specifically for use in PEX piping system
PEX end designed to ASTM F1807
Ball valves designed to IGC157
Applied only for water
Solder ends comply with ANSI B16.18
Butterfly handle available for 1/2'', 3/4'', 1''
Allows draining of the non-pressure side of valve when closed
Pex Ball Valve FAQs
What is a pex ball valve?
half inch pex ball valveis a kind of valve, this expansion pex ball valveis driven by the valve stem by the opening and closing part and rotates around the axis of the ball valve to realize the control and adjustment function of the fluid. The different types that our brass valve factory provides include pex ball valve with bleeder, pex mini ball valve, pex pipe ball valve, pex to copper ball valve and so on.
How do you secure a pex ball valve?
Regardless of whether the pex ball valve is online or not, the installed pex valves should be opened and closed several times at an interval of 1 to 3 months to keep the small brass valve in a smooth, normal and good state. When closing and opening operations, the operating lever should be in a vertical state, with steady force, and the operation is in place.
Can you reuse pex valves?
Whether the Pex valves can be reused depends on the wear of the valve. If the wear is not serious and does not affect its function, it can be reused. If the damage is severe, it cannot be reused. If you are not sure about the damage to your Pex valves, please contact us.
Tips For Valve Connection
The valve connected by pipe thread is connected with the pipe thread of the pipe end. The internal thread can be a cylindrical pipe thread or a tapered pipe thread, and the external thread must be a tapered pipe thread.
As for valve connection, you need to control the length of the external thread of the pipe end. In order to prevent the pipe end from being excessively screwed in to press the inner end surface of the thread of the gate valve pipe, the valve seat will be deformed and the sealing performance will be affected.
For valve connection including 1 inch bronze ball valve connection, when installing and tightening, you need to wrench the hexagonal or octagonal part on the same end of the thread, and should not wrench the hexagonal or octagonal part on the other end of the valve to avoid deformation of the valve.
As a professional bronze valve manufacturer, Carbo has high-quality bronze valvefor sale. Welcome to contact us if needed.
Send product request
Other supplier products
 |
Brass Pressure Reducing Valve | The brass water pressure reducing valveis used to change the throttling area and change the fluid's flow rate and kinetic energy to prevent further... |
 |
Brass Check Valve | Brass Check Valve The composition of the brass one way check valveis an alloy composed of copper and zinc. If it is only composed of copper and zi... |
 |
Carbo OEM Brass Valves | About Carbo Valves As a professional OEM brass valvesupplier, we can produce high-quality bronze valves and superior brass valvefor water for you.... |
 |
Ball Valve With Drain | Carbo, a professional boiler drain ball valvesupplier, provides high-quality brass ball valve with drain, which has the lowest flow resistance. Bec... |
 |
OEM Brass Ball Valves Factory | OEM Brass Valve Supplier The brass ball valves for wateris evolved from the cock. Its opening and closing part is used as a sphere, which uses the... |
Same products
 |
4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve | Seller: Zhuji Oubote Auto Parts Co., Ltd. | 4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start... |
 |
Aluminum Gas Valve | Seller: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,... |
 |
Yoyik supply Fan slider S4GA8814 for turbine generator | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | Yoyik supply Fan slider S4GA8814 for turbine generator Is a major production of Dongfang Yoyik. D... |
 |
API 6A FC Slab Gate Valve | Seller: China JSC Valve Manufacturer Group Co., Ltd. | FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a... |
 |
API 599 Lubricated Plug Valve | Seller: China JSC Valve Manufacturer Group Co., Ltd. | Full Bore Metal Seated Lubricated Plug ValveProduct description: Pressure balance, lubricated, fu... |
