Brass Pressure Reducing Valve
The brass water pressure reducing valveis used to change the throttling area and change the fluid's flow rate and kinetic energy to prevent further pressure losses, achieving the goal of pressure reduction. The brass water pressure regulatorwith gauge is an automatic OEM brass ball valve that relies on the energy control of the medium itself and the adjustment of the regulating system to balance the fluctuation of the pressure behind the valve with the spring force so that the pressure behind the valve remains constant within a specific error range. Carbo also provides high-quality bronze valvefor different needs of our customers.
Brass Pressure Reducing ValveDetails:
The adjusting pressure reducing valve produced by water pressure reducing valve manufacturers is usually positioned upright on a horizontal pipeline for ease of operation and maintenance.
Brass Pressure ReducerSpecifications
|
Pressure |
Medium |
Temperature |
Product Information |
|||||
|
water, steam, noncorrosive liquid |
1/2" |
3/4" |
1" |
1-1/4" |
1-1/2" |
2" |
||
|
Pressure |
Medium |
The highest temperature |
Maximum inlet pressure |
Product Information |
|||||||
|
water |
80℃ |
1/2" |
3/4" |
1" |
1-1/4" |
1-1/2" |
2" |
3" |
4" |
||
|
Material |
Pressure |
Operating temperature |
P/N |
SIZE |
H |
B |
L |
|
Bronze |
400psi |
-10℃≤T≤110℃ |
21051 |
1/2" |
41 |
98 |
|
|
21052 |
3/4" |
||||||
|
21053 |
1" |
119 |
|
Material |
Pressure |
Operating temperature |
P/N |
SIZE |
H |
B |
L |
D |
N |
|
Bronze |
400psi |
-10℃≤T≤110℃ |
12331 |
1/2" |
12 |
9 |
|||
|
12332 |
3/4" |
17 |
|||||||
|
12333 |
1" |
|
Material |
Pressure |
Operating temperature |
P/N |
SIZE |
DH |
H |
B |
L |
|
Bronze |
400psi |
-10℃≤T≤110℃ |
22031 |
1/2" |
121 |
|||
|
22032 |
3/4" |
63 |
||||||
|
22033 |
1" |
129 |
|
Material |
Pressure |
Operating temperature |
P/N |
SIZE |
H |
B |
C |
G |
L |
F |
|
Bronze |
400psi |
-20℃≤T≤180℃ |
22131 |
1/2" |
43 |
|||||
|
22132 |
3/4" |
43 |
Brass Water Pressure Reducing Valve Benefits
The internal thread is connected to the 1 2 in brass fpt x fpt pressure reducing valve, 3 4 in brass fpt water pressure reducing valve, which has a compact size. The brass water pressure regulator with gaugeis easy to install and other features, and with a built-in filter, which can facilitate the overall installation operation, avoid clogging by debris and make it safer and more reliable.
The unvented pressure reducing valve produced by our factory is a direct-acting adjustable pressure reducing valve. Using diaphragm type hydraulic operation can be installed horizontally or vertically in water supply, fire fighting system, or other clean water systems. The outlet pressure of the brass ball valves for water can be controlled to a relatively fixed value within a particular flow range. Both the dynamic and static pressure is reduced, and the operation is stable, with no noise, no vibration, water hammer reduction, and pipe network protection.
The proportional pressure reducing valve is suitable for installation at any angle. Lightweight, small size, convenient installation, and maintenance.
As a brass valve factory, we can offer sorts of related products for sale, anything you need, please contact us.
Send product request
Other supplier products
 |
China Bronze Ball Valve Supplier | A bronze ball valveis a type of valve used to regulate the flow of liquids or gases in a pipeline. It consists of a spherical ball with a hole in t... |
 |
Carbo OEM Brass Valves | The working principle of valve is not exactly the same, and different valves have different working principles. The working principle of the brass ... |
 |
Bronze Ball Valve | Flanged bronze ball valve has the same action of rotating 90 degrees, the difference is that the cock body is a sphere, with a circular through hol... |
 |
Bronze Check Valve | A bronze check valve is a type of automatic valve. The valve disc is pushed by the pressure of the flowing media in the pipeline to close and open ... |
 |
Brass Ball Valve | The brass ball valves for wateris evolved from the cock. Its opening and closing part is used as a sphere, which uses the sphere to rotate 90° ... |
