IPD10-40 Piloted 3-Way Spool Valve
The IPD10-40 is an advanced Piloted 3Way Spool Valvedesigned for fluid control applications. With its piloted operation, it offers precise control over fluid flow and direction. Its robust construction and efficient design make it suitable for industries requiring accurate and responsive fluid control in diverse operating conditions.
Specifications of IPD10-40 Piloted 3 Way Hydraulic Spool Valve
|
Product Model |
IPD10-40 PILOTED 3-WAY SPOOL VALVE |
|
Operating Pressure |
240 bar(3500 psi) |
|
Proof Pressure |
350 bar(5100 psi) |
|
Flow |
See Performance Chart |
|
Internal Leakage |
82 ml/min. max (5 cu. in./minute) at 207 bar (3000 psi) |
|
Pilot Pressure Required |
To Spool Crossover:7.6 bar(110 psi);To Full Spool Shift:8.6 bar(125 psi);Oil Volume Required to Full Shift:0.65 ml (0.04 cu. in.) |
|
Temperature |
-40°℃～100°C |
|
Fluids |
Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu).Installation:No restrictions |
|
Cavity |
IVC10-4,See page 302. |
Note: This valve is designed with a dynamic oil-to-atmosphere seal in the vent section. Ambient conditions will cause this vent seal to degrade which will reduce the valve’s cycle life. If this could cause a problem, we suggest that a non-vented model be selected, or special seal be used. Consult Inno for assistance.
Material
|
Cartridge |
Weight: 0.16kg. (0.35 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces. |
|
Seal |
D type seal ring. |
|
Standard Ported Body |
Weight: 0.34 kg. (0.75 lbs.); Anodized high-strength 6061 T6 aluminum alloy, rated to 240 bar (3500 psi). |
Ductile iron and steel bodies available; dimensions may differ. Consult Inno.
Features of IPD10-40 Piloted 3-Way Spool Valve
Operation Symbol of IPD10-40 Piloted 3-Way Spool Valve
In a neutral position (unpiloted), the IPD10-40 allows flow from ③ to ② bidirectionally, while the flow is blocked at ④. V is a spring chamber vent-to-atmosphere, which is internally O-ring sealed to avoid oil flowing from the cartridge flow paths. On remote pilot signal at ①, the valve shifts to open from ③ to ④, while blocking flow at ②. Because of the spring chamber drain, the cartridge may be fully pressurized at any port without affecting the required pilot pressure.
If you are looking for professional cartridge valve manufacturers, please contact us, and we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
I1CPBD300F2P Counterbalance Valve | The I1CPBD300F2P Counterbalance Valveis a high-performance hydraulic valve designed for applications with demanding overrunning loads. Its precise ... |
 |
IMR10-47B Manual Directional Valve | This valve empowers operators with the ability to adjust and direct the flow of fluid, enabling precise control over the operation of hydraulic mac... |
 |
IFR10-39 Flow Fregulator Pressure-Compensated Valve | A screw-in, cartridge-style, adjustable orifice, pressure-compensated, manually-operated, bypass-type hydraulic flow regulating valve. It can be us... |
 |
Hydraulic Flow Control Valve | The series of 12 volt flow control valvecomprises flow control, pressure-compensated flow regulators, flow divider/combiners, needle valves, and mo... |
 |
Direct Acting Relief Valves | Direct acting pressure relief valve, also known as direct-acting pressure relief valves, are hydraulic valves that are designed to relieve excessiv... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
