Check Valve 10 Inch

• 

A lift check valve is a fluid control device that has components such as a valve body, piston, spring and gasket. Under normal working conditions, the top of the piston seals the valve seat by spring force to prevent fluid backflow. When the upstream fluid pressure decreases and the downstream pressure is higher than the upstream, the piston will automatically open to allow the fluid to run normally. However, if the downstream pressure is reduced and the upstream pressure is higher, the piston seals, preventing backflow and fluid leakage.

Details of Check Valve 10 Inch

Lift check valve is one of the most common check valves installed in piping systems. It has the characteristics of compact structure and stable performance, and is suitable for petroleum, natural gas, chemical industry, water treatment and other fields. Lift check valve can be applied to high pressure and high temperature environment and special working conditions to prolong service life.

10 Inch Check ValveSpecification

As a reliable valves factory, we will do our best to meet all the needs of customers.

Other supplier products

	Check Valve 50mm	Check Valve 50mmis a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline p...
	Class 2500 Industrial Valve	Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for ...
	Class 150 Valve	globe valve class 150is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) ...
	Check Valve 8	Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check v...
	Class 3000 Industrial Valve	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-rated ball valve that is small and light. It works...

Same products

	Клапан	Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Seller: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Seller: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...