Graphite electrode 500
UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.
In order to meet the requirement of higher work efficiency and lower total cost, large capacity ultra-high power arc furnaces are becoming more and more popular. Because of this, UHP graphite electrodes with diameters of over 500 mm will dominate market.
FEATURE
Withstand large currents, high discharge rate.
Good dimension stability, not easy to deform.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
High mechanical strength, low electrical resistance.
High machining accuracy, good surface finishing.
SPECIFICATION
Table 1: Technical Specification of UHP Graphite Electrode
|
Resistance |
Density |
FlexureStrength |
ElasticModulus |
AshContent |
CTE |
CurrentLoad |
CurrentDensity |
|
|
(inch) |
(≤,µΩ·m) |
(≥,g/cm3) |
(≥,MPa) |
(≤,GPa) |
(≤,%) |
(100°C–600°C) |
(A) |
(A/cm2) |
|
|
|
|
|
|
|
(≤,10-6/°C) |
|
|
|
10 |
14 |
8100–12200 |
20–30 |
|||||
|
12 |
14 |
15000–22000 |
20–30 |
|||||
|
14 |
14 |
20000–30000 |
20–30 |
|||||
|
16 |
14 |
25000–40000 |
19–30 |
|||||
|
18 |
14 |
32000–45000 |
19–27 |
|||||
|
20 |
11 |
14 |
38000–55000 |
18–27 |
||||
|
22 |
11 |
14 |
42000–66000 |
17–26 |
||||
|
24 |
11 |
14 |
49000–76000 |
17–26 |
Table 2: Graphite Electrode Size & Tolerance
|
Diameter(mm) |
Length(mm) |
||||||
|
NominalDiameter |
ActualDiameter |
NominalLength |
Tolerance |
ShortLength |
|||
|
(inch) |
(mm) |
(max.) |
(min.) |
(roughspot) |
|||
|
10 |
250 |
256 |
251 |
248 |
1600/1800 |
±100 |
-275 |
|
12 |
300 |
307 |
302 |
299 |
1600/1800 |
||
|
14 |
350 |
357 |
352 |
349 |
1600/1800 |
||
|
16 |
400 |
409 |
403 |
400 |
1600/1800/2000/2200 |
||
|
18 |
450 |
460 |
454 |
451 |
1600/1800/2000/2200 |
||
|
20 |
500 |
511 |
505 |
502 |
1800/2000/2200/2400 |
||
|
22 |
550 |
562 |
556 |
553 |
1800/2000/2200/2400 |
||
|
24 |
600 |
613 |
607 |
604 |
2000/2200/2400/2700 |
||
SURFACE QUALITY
There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.
|
SpecificationDefectDimension |
NominalDiameterofGraphiteElectrode(mm) |
|
|
300–400 |
450–600 |
|
|
Diameter(mm) |
20–40 |
30–50 |
|
(<20mmshouldbenegligible) |
(<30mmshouldbenegligible) |
|
|
Depth(mm) |
5–10 |
10–15 |
|
(<5mmshouldbenegligible) |
(<10mmshouldbenegligible) |
|
Send product request
Other supplier products
 |
RP/HP/UHP graphite electrode 500mm | UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which... |
 |
UHP graphite electrode 600 | Graphite electrode is mainly applied for metallurgy industry and calcium carbide, phosphor-chemical enterprise, such as iron and steel smelting, in... |
 |
Customized graphite crucible | A graphite crucible is a high-temperature container, usually made of high-purity graphite material, used for material storage, transportation, and ... |
 |
UHP graphite electrode 450 | Graphite electrode is mainly applied for metallurgy industry and calcium carbide, phosphor-chemical enterprise, such as iron and steel smelting, in... |
 |
Graphite stick | Our factory provides graphite rod, which is commonly used in the electric heater of high-temperature vacuum furnace. The maximum operating temperat... |
Same products
 |
Impregnated Graphite Electrode | Seller: Zhongsheng Carbon Technology Co., Ltd | ZSCGraphite electrodeare manufactured with high quality raw materials including petroleum cokes,n... |
 |
Graphite Heating Rod | Seller: Zhongsheng Carbon Technology Co., Ltd | Graphite Heating Rodis Applied for industrial furnaces as structural or heating parts, like gra... |
 |
Graphite Electrode Scraps | Seller: Zhongsheng Carbon Technology Co., Ltd | The graphite scraphas different definitions in different materials. Some materials and literature... |
 |
HP Graphite Electrodes | Seller: Zhongsheng Carbon Technology Co., Ltd | Graphite electrode are manufacturedwith high quality raw materials including petroleum cokes, nee... |
 |
UHP Graphite Electrodes | Seller: Zhongsheng Carbon Technology Co., Ltd | Graphite electrodeare manufactured with high quality raw materials including petroleum cokes, nee... |
