Cylinder valves for automatic loading and unloading machine
Cylinder valves for automatic loading and unloading machine is according to the national pipe pliers or other easily damage bottles is strictly prohibited tools and cylinder factory, inspection of loading and unloading valve requirements
Test station such as the needs of the work of loading and unloading valve design and manufacturing. Suitable for diameter in 219 - phi phi 426 m m within the scope of all kinds of cylinder to cylinder valve is installed,
Discharge. The operation is simple, safe and reliable performance.
Main technical parameters
Models: PFX - 01 (including electronic torque control, torque sensor was according to the demand of customers)
(1) motor power: 1.5 kW
(2) transmission ratio: 1:60
(3) the spindle speed: 15 r/min
(4) the air pressure: 0.5-0.8 MPa
Cylinders (5) use range: from 219-219 mm in diameter; 600-2000 - mm length
(6) of loading and unloading valve, manual/automatic
Other supplier products
|
adlocks FL08 flange type machine |
Padlocks FL08 type flange machine 2Seth, padlocks FL08 flange type machine (flange litelocker) is a strong and advanced locking type, it can be two... |
|
Clamp type punch |
The main technical parameters:Use pressure for 3 to 7 kg, use a pressure of 4.5 tons, 7.5 tons.Pressure relay setting and automatic control pressur... |
|
Gas cylinder pressure tightness test machine |
An overview of theGas cylinder pressure tightness test machine is in accordance with the requirements for G B12137 for bottles, valves and plug thr... |
|
GPV air booster pump |
air booster pump is applicable to the original air compressor system to improve
Pressure working environment, the working system of air pressure
Up... |
|
fluid pump |
Seth fluid pump is by Seth company introduction of foreign products technology, continuous innovation to improve and become, Seth fluid pump has th... |
All supplier products
Same products