Flexible Metal Conduit Water + EMI Proof - PEG23PVCTB Series

Flexible Metal Conduit Water + EMI Proof - PEG23PVCTB Series

Water Proof Flexible Metal Conduit-EMI shielding, PEG23PVCTB series is manufactured with galvanized steel strip by continuous wound in interlock profile coated by PVC jacket and then shielded with tinned copper braiding. This is an upgrade design basing on the EMI shielding series. The Flexible Metal Conduit EMI Proof sizes meet with the system normally used in Europe market. This series of flexible conduit is in excellent mechanical characteristics and water & dust seal. The braiding brings further abrasion resistance. High level of EMI shielding is available when installed in the environment with possible electromagnetic interference. The PVC jacket is also fire retardant and belongs to low fire hazard product. The material is RoHS approved as well to answer the demand of environmental protection product.

 

Material:Galvanized Steel + PVC Jacket+ Tinned Copper Braiding

Profile:Interlocked

Temperature Range : -25℃~+90℃, -40℃~+105℃

IP Rating : IP 66

Flexibility : Medium

EMI Screening Level : High

RoHS Compliance : Yes

Our company manufacture Flexible Metal Conduit Braiding, Flexible Metal Conduit Water Proof with EMI Shielding, Interlocked Flexible Metal Conduit, Flexible Metal Conduit EMI Proof, Square-lock SUS Flexible Metal Conduit etc. High quality but low price.

 

Nominal Conduit Size (mm)

Nominal Conduit Size (inch)

Part Number

ID (mm)

OD (mm)

Bending Radius (mm)

Package / Roll (ft/m)

Measurement(LxWxH mm)

10

1 / 4

PEG23PVCTB - 10

   

65

25

12

5 / 16

PEG23PVCTB - 12

   

85

25

16

3 / 8

PEG23PVCTB - 16

   

105

25

20

1 / 2

PEG23PVCTB - 20

   

125

25

25

3 / 4

PEG23PVCTB - 25

   

145

25

32

1

PEG23PVCTB - 32

   

185

10

40

1 - 1/4

PEG23PVCTB - 40

   

225

10

50

1 - 1/2

PEG23PVCTB - 50

   

275

10

63

2

PEG23PVCTB - 63

   

315

10

 






Send product request

To: Zhejiang Flexible Technology Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Flexible Metal Conduit Water Proof - PAS23PVC Series
Flexible Metal Conduit Water Proof - PAS23PVC Series Flexible Metal Conduit Water Proof - PAS23PVC Series PAS23PVC Series Flexible Metal Conduit, Interlocked SUS, PVC Jacket Waterproof Flexibl...
Flexible Metal Conduit EMI Proof - PAS23SB Series
Flexible Metal Conduit EMI Proof - PAS23SB Series Flexible Metal Conduit EMI Proof - PAS23SB Series Flexible Metal Conduit PAS23SB Series Flexible Metal Conduit, Interlocked SUS, Stainl...
Flexible Metal Conduit Water Proof - PEG23LSZH Series
Flexible Metal Conduit Water Proof - PEG23LSZH Series Flexible Metal Conduit Water Proof - PEG23LSZH Series Waterproof Flexible Metal Conduit, PEG23LSZH series consists of galvanized steel interl...
Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B)
Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B) Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B)  S53 Series Liquid Tight Conduit Fitting, 90 Degree Elbow Liquid Tig...
Flexible Metal Conduit Water Proof - PES23PVC Series
Flexible Metal Conduit Water Proof - PES23PVC Series Flexible Metal Conduit Water Proof - PES23PVC Series PES23PVC Series Flexible Metal Conduit, Interlocked SUS, PVC Jacket Waterproof Flexibl...
All supplier products

Same products

Jinhong  Plastic mold components internal latch lock DKL-1
Jinhong Plastic mold components internal latch lock DKL-1 Seller: Jinhong Plastic Hardware Mould Fittings Co.,ltd Product features: 1.The product is installed inside the mould, avoiding conflict with the exter...
Jinhong  Plastic mold components internal latch lock DKL-2
Jinhong Plastic mold components internal latch lock DKL-2 Seller: Jinhong Plastic Hardware Mould Fittings Co.,ltd Warning: As shown in the following figure, the first mould opening stroke must be fully open whe...
Jinhong  Plastic mold components SLISER UNITS CA-3
Jinhong Plastic mold components SLISER UNITS CA-3 Seller: Jinhong Plastic Hardware Mould Fittings Co.,ltd More information:https://www.jinhongmc.com or http://www.jhmold.cc/
Jinhong  Plastic mold components Sliser Units CA-2
Jinhong Plastic mold components Sliser Units CA-2 Seller: Jinhong Plastic Hardware Mould Fittings Co.,ltd Product features: 1.The product has a compact appearance, is convenient to install and is easy ...
Jinhong  Plastic mold components Sliser Units CA-1
Jinhong Plastic mold components Sliser Units CA-1 Seller: Jinhong Plastic Hardware Mould Fittings Co.,ltd Product features: 1.The product has a compact appearance, is convenient to install and is easy t...