Precision Locknut
Precision locknut is a common locking part in mechanical parts, used to lock gears, pulleys, and other mechanical parts. The lock nut is used to position the bearing on the shaft. In addition, it can be used to install bearings with tapered bores on tapered journals and adapter sleeves, and to remove bearings from withdrawal sleeves. According to different applications, the lock nut with the locking device does not need a separate tightening device, thus reduced the cost of the shaft. This type of nut is faster and easier to install.
Other supplier products
|
Coupling |
The coupling is used to firmly connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and to... |
|
Withdrawal Sleeve |
Withdrawal sleeve mainly used to fix the tapered bore bearing on the cylindrical journal of the stepped shaft. It is pressed between the bearing in... |
|
Lock Washer |
The lock washer is mainly used to prevent loosening of the parts matched with washer. The most common ones are spring washers, flat washers, and in... |
|
Locknut |
Locknut is common used locking part in mechanical parts, can be used to lock gears, pulleys, and other mechanical parts.The lock nut is used to pos... |
|
Heave tight coupling sleeve |
Heave tight coupling sleeve are widely used in heavy load,it is the mechanical coupling of an advanced base parts. In the coupling of shaft and the... |
All supplier products
Same products