Tungsten Carbide Valve Seats FAQ FOR CLIENTS
Tungsten Carbide Valve SeatsFAQ FOR CLIENTS
Custom Valve Seats
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.
PRODUCT PARAMETERS
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. Elastic sealing material and small actuator's thrust force is used to obtain tight seal of air bubble, compression valve seat's sealing stress elastically deforms the material and squeezes it into the rough surface of the matching metal part to block all leakage paths. The permeability of material is a basis for small amount of leakage for fluid. The seal must be carefully fixed to prevent cracking and air leakage due to differential pressure. Bonding soft valve seat to metal part is one way, but it cannot completely solve the problem because the bond breaks and fails when exposed to thermal shock. A sufficiently large pressure drop will destroy the bonding material. HVOF tungsten carbide coatingultrasonic spraying equipment is used to optimize thermal spraying process so that the denseness of coating can meet the gas sealing requirements under up to 140MPa, the porosity of coating <1%, the bonding strength exceeds 75MPa, the hardness can reach HV1500 and the hardness uniformity fluctuates by no more than HV100; the product surface after coating can reach mirror surface, with roughness less than Ra0.1, and flatness no more than 2 bands, which can effectively reduce the coefficient of friction between Valve Gate and valve seat and improve its service life.
Send product request
Other supplier products
 |
Common Gate Valve Coating Materiails | Common Gate Valve CoatingMateriails Valve Gate PRODUCT PARAMETERS FOR GATE OF GATE VALVE COATING This part can be illustrated by a table shown belo... |
 |
COMMON Valve Seat Coating MATERIALS | COMMON Valve Seat CoatingMATERIALS Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed positi... |
 |
valve Seat And Thermal Spraying | Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Ge... |
 |
TUNGSTEN CARBIDEN VALVE SEAT | TUNGSTEN CARBIDEN VALVE SEAT Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in t... |
 |
VALVE GATE COATING INTRODUCTION | VALVE GATE COATINGINTRODUCTION tungsten carbide valve gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry requir... |
Same products
 |
Efficient Valve Technology for Modern Sanitary Products | Seller: Zhejiang Fuxin Electrical Technology Co., Ltd. | The 6V Solenoid Valve is designed for low-voltage water control in automatic faucets, sensor-oper... |
 |
Durable Equipment for Commercial Cleaning Operations | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE High Pressure Washer is designed for industrial cleaning, vehicle washing, equipment mainte... |
 |
Precision-Engineered Valves for Demanding Conditions | Seller: Zhejiang Naishi Valve Co. | The Cast Steel Trunnion Mounted Ball Valve is designed for high-pressure pipeline applications in... |
 |
Compact Components for Low-Voltage Automation | Seller: Zhejiang Fuxin Electrical Technology Co., Ltd. | The 6V Solenoid Valve is designed for low-voltage water control in automatic faucets, sensor-oper... |
 |
Industrial Shut-Off Solutions for Buried Networks | Seller: Zhejiang Naishi Valve Co. | The Underground Ball Valve from Zhejiang Naishi Valve Co., Ltd. is designed for buried pipeline s... |
