SpO2 Monitoring Sensor
APK offers a broad portfolio of SpO2 sensors, including both reusable and disposable versions for different applications and Patient categories. The principle of pulse oximetry was developed by Nihon Kohden researcher Takuo Aoyagi in the early 1970s. Pulse oximetry measures blood oxygen saturation (SpO2) non-invasively with an infrared sensor on the fingertip. Before that, the measurement of blood oxygen saturation required arterial blood sampling. Thanks to pulse oximetry, the critical parameter of SpO2 can be measured painlessly, continuously, and in real-time.
SpO2 Probe WorkingPrinciple
The reusable SpO2 sensoris mainly composed of a connector, cable, and sensor.
Compatible connector (appearance varies according to specific products)
Cables
Patient end sensor (appearance varies according to specific products)
Intended use of SPO2 Sensor
Intended to be used on corresponding parameter monitors or pulse oximeters by healthcare professionals to collect and transfer the SpO2 and pulse rate signals of the patient.
Plug the sensor into the monitor and verify proper operation as described in the manual.
Select a proper contact position of the patient for the sensor, the preferred position is the index finger, alternative recommends the thumb or little finger.
Reference to the instructions as below, the patient finger must be inserted correctly to the end of the sensor.
The cable of the SpO2 sensor should be placed along the patient's dorsal side and parallel to the arm.
Spo2 Sensor Specification
Specifications of Spo2 Sensor
SpO2 Testing Range: not lower than 70%~100%SpO2
Accuracy Range: Tolerance of ±2% when 90%-100%; ±3% when 70%-89%;
Pulse Rate Testing Range: no lower than (30~245)bpm; Pulse Rate Testing Accuracy±3bpm;
Wavelength (this information is especially useful for healthcare professionals ) Class A: Red 660nm, IR 905nm, Class B: Red 660nm, IR 940nm.
Working Conditions of Spo2 Sensor
Ambient Temperature：5℃~45℃;
Relative Humidity: ≤10%~95%（Non-Condensing）;
Atmospheric Pressure: 50kPa~106kPa.
As one of SpO2 probe manufacturersand SpO2 probe suppliers, we have our own SpO2 sensor factory, SpO2 probe factory, and can offer different SpO2 probe typesfor sale, if you have needs, please contact us.
If you want to know more kinds of medical accessories, please visit our website.
Send product request
Other supplier products
 |
A1418-SA203PV | A1418-SA203PV Covidien > Nellcor Compatible Short SpO2 Sensor Non Oximax Adult Finger Clip Sensor wi Parameter of A1418-SA203PV reusable puls... |
 |
A-MR-06 Mindray Compatible Reusable Pediatric Temperature Probe, 2.252KΩ, 2pin | APK Technology is a national medical supplies company,we provide patient monitoring accessories, mindray temperature probe, medical accessories who... |
 |
A2426-ES | Philips Compatible NIBP Hose Pressure Cuff Extension Tube, single tube, 3m Parameters of A2426-ES NIBP Hose More types of nibp cable, please ... |
 |
ESU Pencils | The electrosurgical pencil (also called an electrocautery pencil, or ESU pencil) is the most common hand-held device used in electrosurgery. Wit... |
 |
Veterinary Monitoring Equipment | Veterinary monitor is a device or system that measures and controls the physiological parameters of a patient animal, can be compared with known se... |
